Evo X upgrades

[Murlo26]

Several people have tuned the DW1300's to work fine, so I think they CAN work, but it might take some time.

Do you maybe have that issue with your return line that I think a few people saw? Or maybe that was just the in tank line for filling the pump setup...can't remember now.

[mlomker]

Are you presently needing 2000cc of injector?

Not at all. I bought them because the choices at the time were 1k or 2k...there was nothing in-between on the X.

Several people have tuned the DW1300's to work fine, so I think they CAN work, but it might take some time.

Bryan@GST has commented that some sets work and some don't...QA might be spotty. I don't have the funds for a lot of Shane's time right now.

He sent me an email suggesting that we swap the 1000's back in so that I can verify that the intake is 100%. That seemed like a good idea. I'm going to try to do that this week. I just need to get one of the ROMs that he used on the dyno.

Do you maybe have that issue with your return line that I think a few people saw?

That was the return line filter plugging up in the stock hanger. BlaqOPs removed yours and I don't have a stock hanger.

That problem causes excessive fuel pressure until the pump burns out. I'd be THRILLED to have excessive pressure right now, for any reason. haha.

[scheides]

I've heard spotty things on the DW1300's as well, so I'll be curious to see how you like them; the weirdest problem being that they're loud. I've never had loud injectors until I put in the dw800's and if the dw1300's are excessively loud that is just plain weird to me!

They seem like the right size to get though so I wouldn't be afraid to use them. So this is now your 4th set of injectors? Goddamn, might as well build a custom IM that supports 4x fuel rails to round off your mammoth fueling system :D

[mlomker]

So this is now your 4th set of injectors?

FML buddy. Over $2k in injectors now. Hope the DW1300's work out so I can sell the others! I can't hear injectors over my pumps. lol.

[Murlo26]

I think the DW1300's will work honestly. Should you be a little nervous...with your luck lately, sure, lol.

But I trust DW, I know people have gotten them to work, so I think Shane can get them to work.

You should be able to recoup most of the ID cost I would think, even used those have to be worth 500+. And the DW1000's are popular, so those should be an easy sell.

Yea you will lose out on some but in the end it will work out hopefully.

[mlomker]

I think the DW1300's will work honestly.

Yeah, and Shane thought the ID's would be fine too. Per usual there isn't anything assured when it comes to 1000cc+ injectors so we're rolling the dice.

I'm not changing anything on this car if we ever get it to run right.

[Murlo26]

I'm not changing anything on this car if we ever get it to run right.

I don't blame you and think this is a great idea!

[mlomker]

I'm going to ditch the PLX OBDII gauge that I'd purchased. I determined that when it is connected to the ECU that the NAV doesn't work. It doesn't provide information that is useful when driving hard and it doesn't log so it's a waste of time. I think I'll just get Tactrix logging set up like scheides does (hopefully that doesnt F with the NAV).

I'm going to put a Prosport fuel pressure gauge in that second pod.

http://i959.photobucket.com/albums/ae80/mlomker/Car%20Sept%202010/premiumfuelpress2.jpg

[mlomker]

Swapped my injectors in DB's parking lot this evening. The DW1000's brought the car back to life. The AFRs are still wild at cruise. Either it's the intake or my stock fpr isn't doing it's job anymore.

I think I'll leave the intake on if it doesn't cause CELs to be thrown.

[simulatedwood]

I'm going to ditch the PLX OBDII gauge that I'd purchased. I determined that when it is connected to the ECU that the NAV doesn't work. It doesn't provide information that is useful when driving hard and it doesn't log so it's a waste of time. I think I'll just get Tactrix logging set up like scheides does (hopefully that doesnt F with the NAV).

Confimed NAV works great with the tactrix logging. :)

Sorry to here about all your issues, be patient, it will all work out. If you need any help troubleshooting, i am willing to help however I can. (I.e. logging or whatever)