Project Lex

[asshanson]

Nice progress, so clean.

[Halon]

Tiny update: :) And yes it's held in place with it's own hardware, jackstands were just used to help me keep it level while I jacked it up with a floor jack.
http://mitsustyle.com/forums/attachment.php?attachmentid=13209&stc=1&d=1355887991






And some pics before it went in all put together. So nice and clean!
http://mitsustyle.com/forums/attachment.php?attachmentid=13205&stc=1&d=1355887991

http://mitsustyle.com/forums/attachment.php?attachmentid=13206&stc=1&d=1355887991

This one you can kinda see the cleaned up diff cover bolts, and the cleaned up diff to subframe mounting bolts. Details...
http://mitsustyle.com/forums/attachment.php?attachmentid=13207&stc=1&d=1355887991

And last one shows the homemade poly diff ear bushings in place. Basically goes subframe, large washer, poly bushing 1, diff ear, poly bushing 2 (stock metal insert is reused in the middle), then the stock concave washer cleaned up with a coat of silver. Thanks again K-dog :D
http://mitsustyle.com/forums/attachment.php?attachmentid=13208&stc=1&d=1355887991

[93gtpeater]

You plan on driving this? its sooooo clean. Cant wait to see your car next spring. Looking good

[Halon]

Thanks man. And oh yeah I plan on driving it a lot, just no more salt :)

[turbotalon1g]

Nice, glad to see u got it together.

[Halon]

Suspension is on. New rotors are on. Calipers on and bolts are TIGHT (for those who were on the fall cruise haha). Tightened up everything!

My cam cores came in, so I'll be sending them off to get reground tomorrow. The 2 missing bolts for my lower control arm showed up so will install them tomorrow as well. Then basically just need install the driveshaft, bleed the brakes, install exhaust, attach rear wheels, and fire her up and take it for a test drive around the block :D

[Constant_Project21]

Looks like you are moving right along! Great work, Brandon!

[scheides]

Nice progress!!!

[JET]

Looking good! You are going to be bored come January when you are all done!

[Goat Blower]

Looking good B-dawg. Wanna come over and do mine next?