Log in

View Full Version : 91 Galant VR4

Pages : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [26] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92
turbotalon1g
03-20-2010, 12:17 AM
Auto baby oh yeah!
awd-drifter
03-20-2010, 12:41 AM
wow. amazing work man. Every time I look at the engine bay, I forget it's a GVR4 lol!
Pushit2.0
03-21-2010, 01:53 AM
http://www.mitsustyle.com/photopost/data/612/medium/Picture_14001.jpg
http://www.mitsustyle.com/photopost/data/612/medium/Picture_14005.jpg
http://www.mitsustyle.com/photopost/data/612/medium/Picture_14004.jpg

The 4 pins for the trunk lid and installed and the heights set. The 2 in the back fit nice under the wing and its easy to slide on and off for filling up, battery or fuel pump service or filling the nitrous bottle.

http://www.mitsustyle.com/photopost/data/612/medium/Picture_14006.jpg
http://www.mitsustyle.com/photopost/data/612/medium/Picture_14009.jpg
http://www.mitsustyle.com/photopost/data/612/medium/Picture_14013.jpg

Now with the trunk lid off the break lights and license plate area are mounted to the chassis and just the trunk lid and wing come off. I have a little more lining up and finish work back here.

http://www.mitsustyle.com/photopost/data/612/medium/Picture_14017.jpg
http://www.mitsustyle.com/photopost/data/612/medium/Picture_14018.jpg

Here is the trunk lid down to the basics. I also added 2 braces on the rear deck lid. Also the front hood pin locations are fabricated, now I just need a hood to install.

http://www.mickeythompsontires.com/strip.php?item=ETStreetRadial&sku=3753R&size=P275/50R15&type=SS

Here are the tires I want to run on all 4 corners. Now I just need to find a wheel to fit a 4 x 114.3 bolt patter and be 15" x 8" wide. Enkei RPF1 or similar.

~John
Halon
03-21-2010, 04:53 AM
I think I just pooped myself.
goodhart
03-21-2010, 07:16 AM
Nawwzz!!!! lol


Only 8" tires? I guess I figured you would need wider for the kind of power you will put down. But hey I'm sure you know waaay more than me haha
Pushit2.0
03-21-2010, 11:31 AM
The rim is 8", the tire tread is 10.5".
turbotalon1g
03-21-2010, 12:13 PM
Amazing work as usual.
iceminion
03-21-2010, 02:44 PM
Now I just need to find a wheel to fit a 4 x 114.3 bolt pattern....

~John

I converted my GVR4 to standard from a donor DSM in the junk yard....its well worth it because the wheel options are much better....also I own only one set of 4 lug wheels.
Pushit2.0
03-21-2010, 11:08 PM
I have thought of doing the 5 lug conversion, if the rims become an issue I will switch over.

~John
goodhart
03-22-2010, 08:22 AM
The rim is 8", the tire tread is 10.5".


Ok, makes more sense. lol