Log in

View Full Version : 91 Galant VR4

Pages : 1 2 3 4 [5] 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92
Swifty1638
09-04-2009, 12:47 AM
I call co-pilot ride again!
TkrPerformance
09-04-2009, 07:23 PM
[QUOTE I also might have to upgrade to a ball bearing version of the GT4202, the standard bearing version will not last forever at high boost. And thanks for looking.

~John[/QUOTE]

So do you want to sell it for a 2nd time. Shane is selling a gt4294r for cheap
Pushit2.0
09-05-2009, 09:26 AM
I will run the turbo I have until something bad happens. The 4294 would be to small for what I want to do with the car.

~John
turbotalon1g
09-05-2009, 10:41 AM
Guy in pa went 9.40@150s@35psi
did 9.09@164@44psi, what more u want?
(u r crazy)
Pushit2.0
09-05-2009, 11:34 AM
I drove my car when it was making 47psi, and it was not fast enough.
turbotalon1g
09-05-2009, 08:31 PM
I could of told you that.
GT4202 74mm, was making 933awhp 2 years ago ran mid 9s.

http://www.youtube.com/watch?v=aMz8RlCmh0g
MustGoFaster
09-05-2009, 10:31 PM
It only ever made 30-35 PSI on the dyno, the clutch wouldn't let it make anything more.
C3L1CA
09-06-2009, 12:26 PM
I can't wait to see this car back on the road! Good luck finishing up the build.
Pushit2.0
09-07-2009, 03:41 PM
http://www.mitsustyle.com/photopost/data/612/medium/Picture_104.jpg
Engine bay shoot, its getting a little crowed in there again.

http://www.mitsustyle.com/photopost/data/612/medium/Picture_107.jpg
Just enough room for the SMIM.

http://www.mitsustyle.com/photopost/data/612/medium/Picture_108.jpg
I will find a spot to stick the waste gate.

http://www.mitsustyle.com/photopost/data/612/medium/Picture_112.jpg
The baby eater back home.

http://www.mitsustyle.com/photopost/data/612/medium/Picture_121.jpg
Yes that is diamond plate.

http://www.mitsustyle.com/photopost/data/612/medium/Picture_115.jpg
This is one of the only good runs the car made at high boost, and we let off early for some reason, it revs to ~9700rpm and this run ended at ~9000rpm.

http://www.mitsustyle.com/photopost/data/612/medium/Picture_119.jpg
Here is a MPH power band display. That is Kyle's 1g off the spray, again my run was shut down early so I "guessed" what it would do based on the WG pressure runs that were brought to redline. The boost does spike on my car, then the clutch slips and it settled at 36psi, on the street I logged as high as 47psi stable. The car was making the standard ~10hp per psi, at least from WG pressure(26psi) to the higher boost runs (36psi).

~John
TkrPerformance
09-07-2009, 03:52 PM
Looking good.
I found the non cruise cable for you