Log in

View Full Version : Beater 2g

Pages : [1] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
C3L1CA
10-06-2008, 11:45 PM
I've always loved the look of a 2g eclipse, and when I saw a black 95 gsx go up for sale on mnsc for 2k I just had to pick it up. It has been a pretty slow process, but it's been really fun project and I've learned more than i ever thought I could.

Story:
Picked the car up in September of 07, with "engine problem."


http://i6.photobucket.com/albums/y202/C3L1CA/new/DSCN0232.jpg

I tried to get the car running for a couple days but decided it wasn't worth the money or time to figure out what was wrong with it. So it sat for a while before I had some time to start ripping it apart.

http://i6.photobucket.com/albums/y202/C3L1CA/new/IMG_9108-1.jpg
http://i6.photobucket.com/albums/y202/C3L1CA/new/IMG_9247-1.jpg
During tear down I figured out why it had "engine problems"...
http://i6.photobucket.com/albums/y202/C3L1CA/new/IMG_9496.jpg
At least I made a crank puppy out of it
http://photos-f.ak.facebook.com/photos-ak-snc1/v314/148/92/40103751/n40103751_32675237_6945.jpg

Over the next couple months I picked up a rebuilt 6 bolt motor and some other goodies. The car also just kinda sat there most of the winter because of no real time to work on it.

http://i6.photobucket.com/albums/y202/C3L1CA/new/DSC02206.jpg

http://i6.photobucket.com/albums/y202/C3L1CA/new/IMG_9542.jpg

Fixed the normal 2g rust problem
http://i6.photobucket.com/albums/y202/C3L1CA/new/DSC02223.jpg

Finally got things all put back together about a month ago.
http://i6.photobucket.com/albums/y202/C3L1CA/new/IMG_9710.jpg

Ready for the first test drive
http://photos-h.ak.facebook.com/photos-ak-sf2p/v331/148/92/40103751/n40103751_32716767_4455.jpg

Complete mod list:
Rebuilt 6 bolt w/balance shafts removed
272 DKS cams
DSMLink
AEM Fuel Rail
1600cc injectors
FP3065
FP exhaust Manifold
JM Fab "Race" Intake manifold
3" Megan down pipe
FP 2.5" o2 housing
tial 44mm wastegate
arp head studs
cometic head gasket
fp 4" intake
K&N filter
fp oil feed from head
fp oil drain
fp -4 inline filter
hallman pro boost controller
maf translator
msd wires
prothane motor mount inserts
sbr/kentics fmic
tial q bov
re-wired 255
tractor battery:rollinglaugh:
custom mount for said battery
Compeititon clutch stage 4 clutch
fidanza flywheel

Think thats all the major stuff.

Hopefully she puts down at least 100awhp. Gotta set my goals low so if I make more than that, I can just be that much happier.:biggrin:
1QUICK4
10-06-2008, 11:50 PM
Looking good Brad. Can't wait to hear that thing spool!
C3L1CA
10-06-2008, 11:53 PM
Looking good Brad. Can't wait to hear that thing spool!

Thanks Brian! Hopefully you'll hear it sooner than later ;)
sleepy2lazy
10-07-2008, 12:28 AM
Looking good. Thats how my car is gonna be like if i keep it. Bad thing is I got no room like you do. Fixing it would take about the same amount of time.

Good job tho. Well done.
C3L1CA
10-07-2008, 12:34 AM
Looking good. Thats how my car is gonna be like if i keep it. Bad thing is I got no room like you do. Fixing it would take about the same amount of time.

Good job tho. Well done.

Thanks man!
scheides
10-07-2008, 12:49 AM
Dude, awesome build! Take that thing to shane filled with E85 (I'm assuming that's why you went with the 1600's?) and put down some powa. I'm sure there'll be some kinks in it but damn, a year in the making (only!) and looking good. Any suspension mods on that thing? Springs/shocks, and at least pads would be good :)
HiImBrian
10-07-2008, 01:01 AM
Nice work brad. You got er done faster than I really expected.

What I like most about this build is that this is your first turboed car ever haha, and you flippin just went to town. Psh who starts small anymore lol
C3L1CA
10-07-2008, 01:03 AM
Dude, awesome build! Take that thing to shane filled with E85 (I'm assuming that's why you went with the 1600's?) and put down some powa. I'm sure there'll be some kinks in it but damn, a year in the making (only!) and looking good. Any suspension mods on that thing? Springs/shocks, and at least pads would be good :)

Thanks Scheides. Yes, it is running e85 and will be going up to Shane soon I hope. Hell the car probably wouldn't be running without Shane, I asked him a random question everyday for a while there about the 6 bolt swap and other little things, Shane is the man! Stock suspension is still in it, kinda ran out of money :( Some springs/struts will probably be the next thing I buy, as I don't really like it looking like a 4x4. Got some hawk hps pads on it and some fresh rotors. It also has a couple new calipers as it seems like every bolt on this car is rusted and wants to break off. Still have a LOT left to do but she's getting there.

Thanks again for the kind comments guys!
C3L1CA
10-07-2008, 01:06 AM
Nice work brad. You got er done faster than I really expected.

What I like most about this build is that this is your first turboed car ever haha, and you flippin just went to town. Psh who starts small anymore lol

haha Thanks Brian! I didn't think it'd get done till next year for a while there, but seeing fast cars everyday in the summer lit a fire under my butt to get it done. I still think of my build as small after seeing Shane's turbo next to mine :rollinglaugh:
sleepydsm
10-07-2008, 01:21 AM
Looks nice, I like the mods. Push that stock 6 bolt!