Goodhart's budget beater 1g

[goodhart]

Guess it's been a while. I forgot this little bit.

Figured I'd clean up the crusty old thermostat housing I had before I bolted it on the nice clean engine.
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xaf1/v/t1.0-9/10155190_10202658971328634_126192838_n.jpg?oh=6652 cf86a550b916577ef4ccce88b92a&oe=548F72BF&__gda__=1417855409_63e36f7aadc4d2a809336259311d5ea 3

Little bit of wire wheel action
https://scontent-a-ord.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/1978814_10202658971768645_1567328654_n.jpg?oh=ea9a 7861299738b39147433746afd24e&oe=548D29F2

Going to relocate some of the sensors for a cleaner look and eliminate unneeded holes. I had Camden (Spoolin_Turbo aka Hughes Jr) weld all this stuff up for me. Thanks again Cam!
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/10325318_10202841123282319_8440763994324678652_n.j pg?oh=2cd47c3a981e7087e7ef8bb9ed201ab0&oe=549B00EE&__gda__=1418815480_226a3444779977834bd2a1bde378f6f 4

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/1969142_10202841122282294_5586304720671892986_n.jp g?oh=561bae1b372f51326f1db062c4ef5fe9&oe=5499689E&__gda__=1419520929_9818a74929ca6128552bee077ffe72f 4


Also had Camden mod the water pipe some since I won't be running coolant to my throttle body, I also decided to keep my heater core in the system because it's honestly simpler/easier just to keep it.

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xfa1/v/t1.0-9/10254042_10202841122642303_507497681767491190_n.jp g?oh=f4dfbab5f57ed9d43f1d92dcac601c20&oe=5498D457&__gda__=1417835484_6e40f023a423f52916c0f12e5919ad3 2

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xfa1/v/t1.0-9/10247332_10202841122922310_5278925651570286847_n.j pg?oh=1d8281f8ffeeea7ab598dd851c8c3289&oe=549BCCBC&__gda__=1418857041_5abd844935b998152ca441a4fc4aafd 6

I had these powder coated, but I must have forgot to take any pictures of the end result. They are semi gloss black just like the old water pipe:
https://scontent-a-ord.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/10153211_10202629815439755_1002079237_n.jpg?oh=638 19c7b489e6d494011a0387b9b497d&oe=548F26CB


I never did post an pics since I got the wastegate either, so here that is. Carey got me a killer deal on it, fit great on their o2 housing.
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/10659429_10203820357962574_1733357510671581541_n.j pg?oh=44cb177b33cca20612b417bcb7a07d03&oe=548C643E&__gda__=1419572008_55c05df03e1d18e988182d6a2fa4cba e


One last piece of the engine portion of the build, sweet replacement baffles I got from a guy on t00ners. Have yet to figure out which valve cover I am going to run yet, but when I do these will be going in it along with 2 5/8" barb fittings for my catch car setup. Camden will be welding all this up for me as well. Not using AN fittings, just keepin it simple and easy to work on! I'll get pictures of all that when the time comes.
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/10559695_10203652048954954_8528192314571262939_n.j pg?oh=fe701838bc45dcb26efdb9ac7891ac8f&oe=54C97A01&__gda__=1418063998_cd498e557af7e357d6b2a75eb011555 9



Progress is at a snails pace now with a 6 month old, my oldest starting preschool and the sports he's in along with all of the extra stuff I've been doing at work lately.

[goodhart]

Picked this up Buschnuts FPR quite a while back, forgot to put it on here. It's going on the stock fuel rail I shaved and had coated with the same black as the other parts.

http://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/10171147_10202755279296273_7645667758161429582_n.j pg?oh=542f96f9b460f798eb0aeda2f519c0dd&oe=5489FF8F&__gda__=1419485168_ebe0f9aaa1aa205afad38c24465c664 1

I also got a sweet deal on some 1450's from DSMDolney for when this thing is ready for some e85. I plan on getting it started on stock 450's just for simplicity. I'll send them to FIC to get cleaned and tested before I put them in, some of the seals are dried out anyways and I think they give you new ones and make them look all purdy when you send them in anyways. ;)

[Mark Leasure]

Looking great so far, great attention to detail with the sensor clean up too! Hey where did you get those baffles from?

[DSMINMN]

Baffles - http://www.dsmtuners.com/threads/laser-cut-valve-cover-baffles.479313/

[Goat Blower]

Looking good! We should do a 1g cruise before the snow flies.

[turbotalon1g]

Frum roll then yes.
Also, same guy I got mine from.

[C3L1CA]

Holy chit, could eat off that engine! Nice work dude!

[goodhart]

Was going to make an updated post and all the pics are nothing but dead links. wtf.

Anywho, going to do some trans work today with Tachyon, then with any luck I'll be getting the harness situation squared away in the next 2-3 months as well. Once it warms up I'll be putting the engine in the car, then bolt on as many parts as I have and see where I sit. Hoping to have it close to complete by July 4th, all dependent on time and $$$ of course.

[DSM MN]

Was going to make an updated post and all the pics are nothing but dead links.

Lol thought it was my phone, refreshed this page like 20 times.

That's a bummer bro, was looking forward to reading this whole build thread.

[goodhart]

Well, I spent the afternoon at Tachyon's having him attempt to show me about 1g gearboxes. The one I've posted about earlier in the thread was not quite what it was supposed to be, a BM trans with billet shift forks and an LSD insert (had neither) but it still looked absolutely mint so I'm very happy with what I got.


Tachyon's Kitchen!

https://scontent.ffar1-1.fna.fbcdn.net/hphotos-xaf1/v/t1.0-9/12647061_10207188519484507_7558338433555772642_n.j pg?oh=44a15158f275496cd8a4bc8c11432b56&oe=57329EBC

Gears and synchros looked great!

https://scontent.ffar1-1.fna.fbcdn.net/hphotos-xpa1/v/t1.0-9/12662503_10207188520084522_6363158486906769788_n.j pg?oh=2bb7666854027d0648dec4aaba4f20f0&oe=574776E4


Here's how clean the inside of it was, Paul figured it must have had very frequent fluid changes - I agree. Even the speedo gear was nice and new looking not all brittle and yellow like another trans we had taken apart had earlier.
https://scontent.ffar1-1.fna.fbcdn.net/hphotos-xtf1/v/t1.0-9/12592212_10207188520444531_8866406363296719349_n.j pg?oh=32e570ced15a248a678c89d69c13ad6e&oe=573FC70B