MitsuStyle MitsuStyle

Go Back   MitsuStyle > The Homefront! > The Parking Lot - On & Off Topic

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-25-2010   #29
Shane@DBPerformance
formerly ecoli
 
Shane@DBPerformance's Avatar
 

Join Date: Oct 2003
Location: On the dyno
Posts: 4,892
Send a message via AIM to Shane@DBPerformance
Re: What does it take to run a 10? 500whp@DB, practice, or both? Neither?

10s are not a problem for normal street tires on an AWD car. 9s or faster are possible, but it starts getting much harder. You can run a 10 with 1.6s to 1.8s 60' times, which are normal for any street tire. Most guys in the 9s are usually pulling 1.5 60's or better, which usually takes some pretty good tires.

Having the power to run a 10 versus actually running a 10 is a gray area. It might only take in the high 300s awhp with a tiny quick spooling turbo and a very light car to run 10s. Or around 400awhp with a close to stock turbo spooling turbo. But the times might be 10.9@122mph for the tiny turbo car versus 10.9@132 for a bigger/laggier turbo. Both are a 10, but you are talking a good 100+whp difference in the same weight car and one would walk away from the other on the freeway. Some of the DSM automatics are running deep into the 9s trapping in the high 130s/low 140s, which would normally be 150+mph territory for the manual trans cars.
__________________
www.dbptuning.com
Shane@DBPerformance is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:07 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.