PDA

View Full Version : GsXtUrBo98's 2G project thread

Pages : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 [36] 37 38 39 40 41
95talonracer
06-19-2012, 01:58 PM
That is def from having a welded center diff. Happens to all with a welded diff if you are turning in tighter areas.
GsXtUrBo98
08-14-2012, 07:42 PM
So I installed a dynatek arc2 and am still having break up problems.. I was at 27psi and turned it down to 25psi and it wasn't as bad. But then I turned it down to 22psi and she goes pretty damn smooth through the gears.. I think I'm in need of a retune..

Note: I also fixed some boost leaks but there isn't any difference from before or after since they were before the maf
blackawdtsi
08-14-2012, 07:56 PM
What are your plugs gapped at?
GsXtUrBo98
08-14-2012, 08:50 PM
20
turbotalon1g
08-14-2012, 09:34 PM
what plugs?
GsXtUrBo98
08-14-2012, 10:14 PM
Ngk bpr8es
blackawdtsi
08-15-2012, 12:37 AM
If they're more than a couple months old, I'd try new plugs first.
turbotalon1g
08-15-2012, 08:02 AM
Why are you running those plugs may i ask?

Switch to BR7ES and see if that changes. If you are on E85 those may be too cold.
GsXtUrBo98
08-15-2012, 08:12 AM
The plugs are brand new just installed. Brad ran them in his 2g so I through them in last year and hadno problems..
turbotalon1g
08-15-2012, 08:28 AM
hmm, i guess I'd try the BR7ES and see if they help any, cheap enough to try.