Wait I'm going to pay over 500 for this:
1 – Cooler w/ Fan Attached
2 – Thin Spacers
2 – Thick Spacers
2 – M8x1.25 30mm Bolts w/ Washers
2 – M6x1 20mm Bolts w/ Washers
2 – M6x1 12mm Bolts w/ Washers
2 – M6 Nuts
2 – Hose Clamps
1 – 36” Piece of Red 16G wire w/Connector
1 – 28” Piece of Wire Loom
1 – Wire Butt Connector
1 – 120 Degree -8 Fitting
1 – 45 Degree -8 Fitting
It looks like a very nice kit, not denying that but I do think you could piece something together that would work just as well for close if not below half the price like Aaron stated.
Threaded Mode