Quote:
Originally Posted by Matt D.
If the X front suspension is the same as or similar to the VIII-IX all you need to do is loosen up the two bolts holding the strut to the steering knuckle, then flip the top bolt 180 degrees. When tightening it back up you push the knuckle and struts inward toward the car and that will get you as much camber as possible out of the front suspension. Keep in mind this will cause you to gain a little toe in.
|
this. take off a wheel and take a look, it's pretty obvious which bolts, there's two big ones. 17mm IIRC, mayyybe 19 (on the CT9A anyways). If you absolutely can't figure it out, give me a call and stop over. We can do it in about 20 mins. 651.236.0985
Threaded Mode