MitsuStyle MitsuStyle

Go Back   MitsuStyle > Hosted Support Forums > Modern Automotive Performance

Reply
 
Thread Tools Display Modes
Old 08-22-2007   #21
Pushit2.0
15min late to the world
Re: The MAPerformance 4g64 Powered FD RX7 Project Overview

I would not want to deal with nitro methane, I was trying to walk threw the pits of top fuel and just warming up the car you could not breath or see anything.

~John
__________________
Moon taxi: 9.45@156.9 mph 41psi 2011... Letting people down sense 2012.
Pushit2.0 is offline   Reply With Quote
Old 08-22-2007   #22
v8klla
 
v8klla's Avatar
 

Join Date: Oct 2003
Location: Cottage Grove, MN
Posts: 2,120
Send a message via ICQ to v8klla Send a message via AIM to v8klla
Re: The MAPerformance 4g64 Powered FD RX7 Project Overview

Quote:
Originally Posted by Pushit2.0 View Post
The big problem with E98 is its legal to run in a NHRA or similar class, but Methonal is, that is why Brent and Shep run the meth, a lot of boost and spray nitrous if you can (two big bottles by tonight).

~John
Stepanie Eggums runs E98 in the NHRA Hot Rod Class? First FWD Honda in the 7's...

http://www.thebiodieselblog.com/alte...od-on-ethanol/
__________________
Chris Carey, President
Modern Automotive Performance
P: 763-545-3800
E: chris@maperformance.com

We want your business! Please contact me directly for a quote or stop by the facility for a quick tour!
v8klla is offline   Reply With Quote
Old 08-22-2007   #23
Pushit2.0
15min late to the world
Re: The MAPerformance 4g64 Powered FD RX7 Project Overview

I have been owned by not searching, o well.

~John
__________________
Moon taxi: 9.45@156.9 mph 41psi 2011... Letting people down sense 2012.
Pushit2.0 is offline   Reply With Quote
Old 08-23-2007   #24
gofastman
James Bond... James Bond
 
gofastman's Avatar
 

Join Date: Sep 2006
Location: Roseville, MN
Drives: 95 Jeep
Posts: 303
Send a message via AIM to gofastman
Re: The MAPerformance 4g64 Powered FD RX7 Project Overview

its too bad they dont sell E85 in a 85% ethanol, 15% C16 formula
__________________
-David C.
Quote:
Originally Posted by bouncer07
If you know Mary Clifford, Ph,.D. Associate Professor of Criminal Justice in St. Cloud State University. Then your well aware of who she is.
gofastman is offline   Reply With Quote
Old 08-23-2007   #25
dumb_ricer
Hates Everything
 

Join Date: Dec 2003
Location: Las Vegas
Drives: Neon
Posts: 445
Send a message via AIM to dumb_ricer
Re: The MAPerformance 4g64 Powered FD RX7 Project Overview

Well, E98 is blended with Race gas, so the 2 percent gas is 110 octane.

The only reason they seem to dilute it is so idiots don't drink it.

I do believe that testing has been done, and E85/C16 mix didn't seem to work too well.
__________________
420A > LS1 > All Else
Superchargers > Nitrous > Turbochargers
I > All else
dumb_ricer is offline   Reply With Quote
Old 08-23-2007   #26
PSI2HI
 

Join Date: Oct 2003
Location: Fargo, ND
Posts: 181
Send a message via AIM to PSI2HI
Re: The MAPerformance 4g64 Powered FD RX7 Project Overview

Get that thing on the dyno tomorrow and bring it up here sat for street legal event and see if you can run down Matt's 2JZ powered Probe.
PSI2HI is offline   Reply With Quote
Old 08-23-2007   #27
blageo23
AWD4G64
 
blageo23's Avatar
 

Join Date: Jun 2004
Location: Shoreview, MN
Posts: 2,286
Send a message via AIM to blageo23
Re: The MAPerformance 4g64 Powered FD RX7 Project Overview

Hey guys, Thanks for takin time to show us the car today. Looks REALLY nice!
blageo23 is offline   Reply With Quote
Old 08-23-2007   #28
dumb_ricer
Hates Everything
 

Join Date: Dec 2003
Location: Las Vegas
Drives: Neon
Posts: 445
Send a message via AIM to dumb_ricer
Re: The MAPerformance 4g64 Powered FD RX7 Project Overview

It is on the dyno right now.

We are only going to get it dialed in on WG pressure for tonight.
__________________
420A > LS1 > All Else
Superchargers > Nitrous > Turbochargers
I > All else
dumb_ricer is offline   Reply With Quote
Old 08-23-2007   #29
PSI2HI
 

Join Date: Oct 2003
Location: Fargo, ND
Posts: 181
Send a message via AIM to PSI2HI
Re: The MAPerformance 4g64 Powered FD RX7 Project Overview

Quote:
Originally Posted by dumb_ricer View Post
It is on the dyno right now.

We are only going to get it dialed in on WG pressure for tonight.
Well crank it up tomorrow. 8.6 ET is the number to beat!
PSI2HI is offline   Reply With Quote
Old 08-25-2007   #30
santa
Boost Spike
 
santa's Avatar
 

Join Date: Oct 2003
Location: Cottage Grove
Drives: 93 talon Automagickinda....
Posts: 1,116
Send a message via AIM to santa
Re: The MAPerformance 4g64 Powered FD RX7 Project Overview

http://www.tristatetuners.com/forum/...ad.php?t=39478


http://www.clubprotege.com/forum/showthread.php?t=32104
These guys^ though it was in a miata
__________________
91 gsx: 734awhp 593ft lbs, best et 10.4@141, @35psi 1.6 60' 2010
93 Talon: 2011 season: Auto, 8.50 cage, For sale!!! $7500
santa is offline   Reply With Quote
Old 08-27-2007   #31
BuildADSM
 

Join Date: Oct 2003
Location: Chattanooga TN
Posts: 630
Send a message via AIM to BuildADSM
Re: The MAPerformance 4g64 Powered FD RX7 Project Overview

so when is the kit swap kit comming out? lol

Very nice! I can't wait to see what this thing does. Are you backhalfing the car? What suspention/rearend are you going with?

Thats funny about the miata... though that would also be fun!

where did you guys manage to find that car with a blown motor?
__________________
EVO 7 owner to C5 owner: You go ahead.... I'll catch up.

Slow is better than broke.... but broke is better than nothing.

Last edited by v8klla; 08-27-2007 at 04:52 PM..
BuildADSM is offline   Reply With Quote
Old 08-27-2007   #32
BuildADSM
 

Join Date: Oct 2003
Location: Chattanooga TN
Posts: 630
Send a message via AIM to BuildADSM
Re: The MAPerformance 4g64 Powered FD RX7 Project Overview

oh also, how did you guys decide to go with a 4G64 vs a 4g63 or G4CS?
__________________
EVO 7 owner to C5 owner: You go ahead.... I'll catch up.

Slow is better than broke.... but broke is better than nothing.
BuildADSM is offline   Reply With Quote
Old 08-27-2007   #33
v8klla
 
v8klla's Avatar
 

Join Date: Oct 2003
Location: Cottage Grove, MN
Posts: 2,120
Send a message via ICQ to v8klla Send a message via AIM to v8klla
Re: The MAPerformance 4g64 Powered FD RX7 Project Overview

Quote:
Originally Posted by BuildADSM View Post
so when is the kit swap kit comming out? lol

Very nice! I can't wait to see what this thing does. Are you backhalfing the car? What suspention/rearend are you going with?

Thats funny about the miata... though that would also be fun!

where did you guys manage to find that car with a blown motor?
No backhalf as of yet. Probably solid axle Ford 9" or similar and 4 link setup unless we can figure out a way to maintain the rx7 suspension.

Chris
__________________
Chris Carey, President
Modern Automotive Performance
P: 763-545-3800
E: chris@maperformance.com

We want your business! Please contact me directly for a quote or stop by the facility for a quick tour!
v8klla is offline   Reply With Quote
Old 08-27-2007   #34
Kevin 1G Drummer
 
Kevin 1G Drummer's Avatar
 

Join Date: Nov 2005
Location: Cottage Grove
Drives: Silver '02 IS300, Blue '06 Suzuki SV1000
Posts: 5,293
Re: The MAPerformance 4g64 Powered FD RX7 Project Overview

Just curious, but is there a reason you cut out the front half of the wheel wells under the hood? I noticed it yesterday at the Cookout, and couldn't really find a reason for it just by looking at it. Other than the maybe, 5 pounds you shaved out.
__________________
'02 Lexus IS300
'06 Suzuki SV1000: Back on the road and ripping hard as ever!
Kevin 1G Drummer is offline   Reply With Quote
Old 08-27-2007   #35
v8klla
 
v8klla's Avatar
 

Join Date: Oct 2003
Location: Cottage Grove, MN
Posts: 2,120
Send a message via ICQ to v8klla Send a message via AIM to v8klla
Re: The MAPerformance 4g64 Powered FD RX7 Project Overview

That is factory actually, there were plastic shrouds there that we had removed.

Chris
__________________
Chris Carey, President
Modern Automotive Performance
P: 763-545-3800
E: chris@maperformance.com

We want your business! Please contact me directly for a quote or stop by the facility for a quick tour!
v8klla is offline   Reply With Quote
Old 08-27-2007   #36
Goat Blower
aka Goodbye
 
Goat Blower's Avatar
 
Asteroids Champion! Beach Squirter Champion!
Join Date: Oct 2003
Location: under the car
Drives: Taylor Made R15
Posts: 7,765
Re: The MAPerformance 4g64 Powered FD RX7 Project Overview

E98 is good stuff. No knock, relatively cheap and smells good to boot. Tough to start the car when it's raining or humid outside though.
__________________
2009 Corvette Z51-SOLD
1992 Mitsubishi Eclipse GSX-SOLD
2013 BMW Z4-Current summer hooptie
2017 GMC Yukon-Current winter hooptie

Goat Blower is offline   Reply With Quote
Old 08-28-2007   #37
gofastman
James Bond... James Bond
 
gofastman's Avatar
 

Join Date: Sep 2006
Location: Roseville, MN
Drives: 95 Jeep
Posts: 303
Send a message via AIM to gofastman
Re: The MAPerformance 4g64 Powered FD RX7 Project Overview

Quote:
Originally Posted by Goat Blower View Post
E98 is good stuff. No knock, relatively cheap and smells good to boot. Tough to start the car when it's raining or humid outside though.
is that because ethanol is hygroscopic?
__________________
-David C.
Quote:
Originally Posted by bouncer07
If you know Mary Clifford, Ph,.D. Associate Professor of Criminal Justice in St. Cloud State University. Then your well aware of who she is.
gofastman is offline   Reply With Quote
Old 08-28-2007   #38
Goat Blower
aka Goodbye
 
Goat Blower's Avatar
 
Asteroids Champion! Beach Squirter Champion!
Join Date: Oct 2003
Location: under the car
Drives: Taylor Made R15
Posts: 7,765
Re: The MAPerformance 4g64 Powered FD RX7 Project Overview

Quote:
Originally Posted by gofastman View Post
is that because ethanol is hygroscopic?
I don't think that's it necessarily, that seems to be more of a concern for storage. I don't think it happens that quickly. I put in a few gallons of regular gas to richen it up a bit since my laptop wouldn't connect and it fixed it immediately.
__________________
2009 Corvette Z51-SOLD
1992 Mitsubishi Eclipse GSX-SOLD
2013 BMW Z4-Current summer hooptie
2017 GMC Yukon-Current winter hooptie

Goat Blower is offline   Reply With Quote
Old 08-30-2007   #39
stikx
Mr -
 

Join Date: Jul 2004
Location: Minneapolis
Posts: 399
Re: The MAPerformance 4g64 Powered FD RX7 Project Overview

Wow, a fd with a dsm heart . I want to see some results from that bullseye (turbo with extended tip right?).
stikx is offline   Reply With Quote
Old 08-30-2007   #40
v8klla
 
v8klla's Avatar
 

Join Date: Oct 2003
Location: Cottage Grove, MN
Posts: 2,120
Send a message via ICQ to v8klla Send a message via AIM to v8klla
Re: The MAPerformance 4g64 Powered FD RX7 Project Overview

Quote:
Originally Posted by stikx View Post
Wow, a fd with a dsm heart . I want to see some results from that bullseye (turbo with extended tip right?).
Correct. We ran into a small torque converter issue, but look for some numbers as soon as we get it back!

Chris
__________________
Chris Carey, President
Modern Automotive Performance
P: 763-545-3800
E: chris@maperformance.com

We want your business! Please contact me directly for a quote or stop by the facility for a quick tour!
v8klla is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:37 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.