The MAPerformance 4g64 Powered FD RX7 Project Overview
 

http://www.maperformance.com/gallery...s/forumsig.jpg

We would like to introduce you to the first FD RX7 powered by Mitsubishi. After several months of contemplation and planning this car was assembled in less than one month to be unveiled at the 2007 DSM Shootout. We are very happy with the results and look forward to your feedback!

I would like to start this thread with a big thanks to our sponsors that helped make this project a reality!

Active Performance Cooling (www.activeradiator.com)
Straight Line Specialties (www.straightlinespecialties.com)
Fuel Injector Clinic (www.fuelinjectorclinic.com)
JM Fabrications (www.jmfabrications.com)
6 Distribution (www.6distribution.com)
Bullseye Power (www.bullseyepower.com
FB Performance Transmissions (www.fbperformance.com)
Jay Racing (www.jayracing.com)
KSport USA (www.ksportusa.com)
Motors By Gosh
Wiseco Pistons (www.wiseco.com)
JKODIS Coatings


Project Details:

1994 Mazda RX7 Touring Edition Chassis

MAPerformance 4g64 Shortblock
Custom Wiseco 4g64 Pistons
Precision Machine Work By Motors By Gosh
MAPerformance Stage 5 Cylinder Head
Custom Active Performance Cooling Radiator
Custom Active Performance Cooling Intercooler
Custom Straight Line Specialties Top Mount Exhaust Manifold
Bullseye Power S380 Turbocharger
Custom JM Fabrications Sheet Metal Intake Manifold
(8) 1600cc Fuel Injector Clinic Fuel Injectors
Dual Fuel Injector Clinic Fuel Rails
FB Performance Ford AO3 Transmission w/Chevrolet Bell Housing
Custom FB Performance Torque Converter
Jay Racing Thermostat Block Off / Alternator Relocation / Water Outlet
KSport USA Coilovers
JKODIS Coatings Valve Cover

*Please feel free to pm us with any additional questions regarding the components used in this project!


Project Goals:

1000+whp
Sub 9 Second 1/4 Mile Pass On DOT Approved Tires

*Please note that we are still in need of a roll cage, upgraded rear end, and parachute before this project will see the race track, look for updates later this season!


Pictures:

For pictures taken during the project please visit our website below:

http://www.maperformance.com/gallery/index.php?list=19


The Completed Project:

http://www.maperformance.com/gallery.../FuelPumps.jpg

http://www.maperformance.com/gallery...s/Ignition.jpg

http://www.maperformance.com/gallery...s/backleft.jpg

http://www.maperformance.com/gallery.../backright.jpg

http://www.maperformance.com/gallery...tpassenger.jpg

http://www.maperformance.com/gallery...enginebay5.jpg

http://www.maperformance.com/gallery...enginebay3.jpg

*Thank you to those that took pictures of our project at the shootout, if we are utilizing your pictures and you would like us to give you credit for the pictures or remove them completely just let us know!

Re: The MAPerformance 4g64 Powered FD RX7 Project Overview
 

Its too bad you couldn't get the turbo to sit just a little bit lower!

Re: The MAPerformance 4g64 Powered FD RX7 Project Overview
 

Very nice guys! Looks sweet all cleaned up!

Re: The MAPerformance 4g64 Powered FD RX7 Project Overview
 

Looks amazing. I also used Motors by Gosh. :)

Re: The MAPerformance 4g64 Powered FD RX7 Project Overview
 

Ill say it agian, I love the black AN fittings! And the car looks mean!

Re: The MAPerformance 4g64 Powered FD RX7 Project Overview
 

It was quite the head turner. I was suprised at how well it turned out! Fun fun!

-A. Swift

Re: The MAPerformance 4g64 Powered FD RX7 Project Overview
 

Looks like you need to incorporate the DSM hood power bulge.

Re: The MAPerformance 4g64 Powered FD RX7 Project Overview
 

X2


Looks fuckin sick. Talkin with one dude asking about how the trip was, and he did mention the 4g64 fd3s. Awesome work guys, you raised some eyebrows.

Re: The MAPerformance 4g64 Powered FD RX7 Project Overview
 

Need to change that badge on the back to say '4GX7' or something....

Re: The MAPerformance 4g64 Powered FD RX7 Project Overview
 

I think some filing could have been done on the turbo and shortened it enough to clear the hood. At least the cut is small and nice. Doesn't look too bad. Same with the car. Nice.

Re: The MAPerformance 4g64 Powered FD RX7 Project Overview
 

Hey!!! You left me out!! I mounted all your tires!!!! :lol:

Re: The MAPerformance 4g64 Powered FD RX7 Project Overview
 

Wow, that thing is crazy! Are you guys thinking about bringing it to the Cookout? We can put it into the "other" category. It would be another car that Pete will have to compete with. hehe.

later,
Curt

Re: The MAPerformance 4g64 Powered FD RX7 Project Overview
 

We will be there with two cars ;)

Chris

Re: The MAPerformance 4g64 Powered FD RX7 Project Overview
 

Poor Pete.

JKODIS Coatings FTMFW!!!

Re: The MAPerformance 4g64 Powered FD RX7 Project Overview
 

Nitromethane? :banana: j/k

Re: The MAPerformance 4g64 Powered FD RX7 Project Overview
 

E98 ;)

Re: The MAPerformance 4g64 Powered FD RX7 Project Overview
 

Where do you get E98 and how much? What is the octane rating on that stuff and how does it compare to C16?

Re: The MAPerformance 4g64 Powered FD RX7 Project Overview
 

the motor octane number for ethanol is 102 (it would measure 116 on the sticker at the pump) compaired to a motor octane of 117 for c16
but ethanol absorbs huge amounts of heat when it vaporizes, so its hard to tell
i would say you could make more power with ethanol, but thats just a wild ass guess

Re: The MAPerformance 4g64 Powered FD RX7 Project Overview
 

NM, I would like to try E98 some day

~John

Re: The MAPerformance 4g64 Powered FD RX7 Project Overview
 

Methanol makes around 15% more HP, so it's popular in drag racing, even though it is toxic and a pain to deal with.