Quote:
Originally Posted by URV8SUX
I ran a 1.32 divided housing on a 6765 few years ago it made 30psi by 6500rpm.
If you looking to get the most power of a 67mm there is better options than the PTE 6766.
|
He's going to be running a 62mm. But you said this in my build thread and failed to produce any examples when I asked. Sure there are some that out flow 6766 but most 67mm turbos out there cost more.
The a/r is very subjective. Halon let me borrow his bw to test fit it on my talon. His exhaust housing is a .91 and when comparing it to the .98 housing off of my gt4294. Even though the a/rs are pretty close Halon's seemed quite a bit smaller.
I went with a 1.32a/r on my 6766 and it also looks smaller than the .98 of the gt42. Even though the a/r is quite a bit larger on the 6766 I can't imagine it will spool any slower that my gt42. I guess we'll find out soon.
Threaded Mode