UBER SS

[Speedfreak]

Great numbers, congrats! That's gonna be fun to drive.

I gotta play with big cubic inches(plus turbo) some day.

[Mark Leasure]

Great numbers, 800hp NA with 93 octane is impressive!

[A//// Guy]

Beastly! Video doesnt work for me.

[niterydr]

Awesome power!
Make sure you get a hit down low where the torque peak is on a proper dyno that can handle the torque load to ensure nothing bad is happening down there.

[Halon]

Video n worky. But that's badass none the less

[tehehodi]

ifLlXTxraK4

[1ViciousGSX]

Thanks guys and thanks for the tip on the video not working.

With 1.8in of vacuum under the carb there's about another 60hp left to get out of it. Not sure if I'm going to chase it down at this time, would require a bigger carb and possibly another intake manifold to go with it. Not ready to spend that money at this time.

I had Chris Straub (cam builder) look at the dyno numbers. He said based on the numbers that peak torque probably landed in the 3600-3800rpm range and would have been close to 770 ft-lb. He also said that it's safe to say that I would be in the range of 670 ft-lb in the 2600rpm range. :shocked:

Fun times to be had for sure.

[Kracka]

Nuuuuuuuuuuuuuuuuuuuuuuuuuuts!!! Definitely take video of this thing making passes at the strip! Good luck keeping all 4 on the ground :D

[1ViciousGSX]

Nuuuuuuuuuuuuuuuuuuuuuuuuuuts!!! Definitely take video of this thing making passes at the strip! Good luck keeping all 4 on the ground :D

I agree, Nuuuuuuuuuuuuuuuuuuuuuuuuuuts!!!
The HP is impressive, but the TRQ is ridiculous!!

There will be video. I might just leave that 200lb cowl hood on it until after the next time to the track. :sasmokin:

[1ViciousGSX]

So glad to see that front end sitting low again.

http://lh3.googleusercontent.com/-ilm4RK56aNc/WOPXmZtwsLI/AAAAAAAAKVI/ePUbpgAgL0U/s800-no/IMG_4820.JPG
http://lh3.googleusercontent.com/-3_R89jWyRvI/WOPXnCxovDI/AAAAAAAAKVM/n8I5eNc-z0Y/s800-no/IMG_4822.JPG