Mark's Evo IX MR Winter Projects

[Shane@DBPerformance]

Just don't mix your own E85 and expect the E85 from a pump to be anything like it.

[bramagedained]

Yep, it was MAP. There is a drum deposit charge tacked on too, so yes the fuel comes with the barrel. I would only use it if you need to, 98 percent of people only need 85. Unless you have a setup that is capable of sky high boost, like 40+psi then 98 provides a knock safety factor.

My car should be capable of the same sort of thing as yours once it comes back :)

[niterydr]

Just don't mix your own E85 and expect the E85 from a pump to be anything like it.

Kind of like brewing your own beer and then getting store bought stuff, DIY Alcohol is always better :beer:

[Mark Leasure]

dyno day video from May 5th.

HV8TVTLkyeI

[mondale]

Was that a 4th gear pull? Also forgot to ask yesterday, what kind of transfer pump are you using for the e98 barrels?

[Mark Leasure]

Was that a 4th gear pull? Also forgot to ask yesterday, what kind of transfer pump are you using for the e98 barrels?

The pull was in 3rd. And I use this pump:

http://www.ebay.com/itm/30-55-Gallon-Barrel-Pump-Racing-Fuel-Oil-Water-Siphon-/190633923097?pt=Motors_Automotive_Tools&hash=item2c62aad219&vxp=mtr

Works better than what you would think!

[Consummate]

Longest 3rd gear ever... Sure that wasn't 4th?!

[Pushit2.0]

Its a load based dyno. It uses a electric eddy current brake to load the car. You set a ramp rate which is how fast the car accelerates. You want to slow things down to get a better sample rate for tunning.

Car sounds good man, was shoot out mode?

[Mark Leasure]

Car sounds good man, was shoot out mode?


Thanks John. The 656 was uncorrected. The shootout mode number was something like 765whp, close to the 771WHP it made on MAP's dyno.

[awd-drifter]

crazy numbers on that dyno! must pull pretty darn good!