PDA

View Full Version : Turning my quest into a dsm.

Pages : 1 2 [3] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
FattyBoomBatty
09-14-2007, 11:38 AM
I've got realtime 3d visuals of all 8 parameters of my engine. Actually I just made that up.

I do have a question, what is the firing order of the coil pack? does it just go 1-2-3-4? or like 1 and 3 are together? this would be a 1G thing, not sure if it's different for 2g's, i don't care.
Matt D.
09-14-2007, 02:06 PM
1-4 and 2-3 are together.
FattyBoomBatty
09-14-2007, 11:28 PM
yay, I plugged it in and got signals for everything. Holy crap is the aem complicated. I have some reading to do. And my tps is wired backward, I should have expected that, lol.
FattyBoomBatty
09-15-2007, 06:38 PM
Here's some more pics as of friday. This is the new-ish setup for wiring. I bought some new split loom tubing for all this, so it'll be cleaned up more, but I re-routed the ignition wires and stuff to go through the secret passage above the wheel well.
http://www.mitsustyle.com/photopost/data/529/medium/DSC01468.JPG

This is where the stock engine harness came through. Now it's the knock and O2 sensors and the coil pack and transistor plugs.
http://www.mitsustyle.com/photopost/data/529/medium/DSC01469.JPG

And here's the location of the stuff.
http://www.mitsustyle.com/photopost/data/529/medium/DSC01467.JPG

And now I have to connect the plug wires, switch the + and - on the tps, make sure I have the right settings for starting it up and it should go. :) yay.
Shotgun!
09-16-2007, 03:39 AM
Good luck buddy!

You went farther than I thought you would!
MustGoFaster
09-21-2007, 12:14 PM
So hows this coming?
TenSecondG54B
09-23-2007, 05:01 PM
yay, I plugged it in and got signals for everything. Holy crap is the aem complicated. I have some reading to do. And my tps is wired backward, I should have expected that, lol.

Cool! I'm glad somebody else finally got the idea working!

You better post videos when your finished...

Tuck them wires!
FattyBoomBatty
09-23-2007, 07:53 PM
This has been put off for a couple weeks because of various delays. But I think this friday I'll be working on it, maybe try to start it. But I think I need longer plug wires. And of course, it depends on if fuel doesn't leak etc. If it starts, then I will not worry about tuning or driving it untill I get the boost tubes worked out, I/C mounted and all the little stuff.
TenSecondG54B
09-27-2007, 12:20 PM
I posted your pictures for you over at SQC.
FattyBoomBatty
09-27-2007, 12:22 PM
Thanks! I'll just keep adding more here, and if you want, feel free to put 'em up there. I will be taking more tomorrow (friday).