The Black Beast

[scheides]

Sweet! Looking forward to feedback and comparo to the gt3076. Should def be more reliable at least :) Love to see some numbers out of this beast, awesome setup!

[asshanson]

If you're running an external gate on a 16g, that is awesome. I wonder if you can better hold boost up top because you don't have some weak internal flapper blowing open. That is when you get E85 and can push 30psi on this thing.

[A//// Guy]

Haha 30psi on a 16 is a wish, but you could get close.

Hope that jpipe worked out for ya!

[goodhart]

Haha 30psi on a 16 is a wish, but you could get close.

Hope that jpipe worked out for ya!

Not on E85, 95tsi runs 29 psi currently, and was up to 31psi on the dyno during tuning.

http://www.mitsustyle.com/forums/showthread.php?t=23782

[Kevin 1G Drummer]

If you're running an external gate on a 16g, that is awesome. I wonder if you can better hold boost up top because you don't have some weak internal flapper blowing open. That is when you get E85 and can push 30psi on this thing.
Yeah, I'm still running the Tial 38 off the o2 housing. We just took out the flapper, then welded up the hole in the side of the turbine housing so we'll see how well it can hold boost in the high RPMs before it just runs out of breath.

I also still need to do a boost leak test to make sure we didn't miss any pinhole spots when we welded up the new outlet pipe.

[TkrPerformance]

good to see dad and you got it all back together. I head from dad there was some problems with it oing together

[turbotalon1g]

37psi spike to 27-28psi by redline here. hit 40psi a couple times.

[goodhart]

37psi spike to 27-28psi by redline here. hit 40psi a couple times.

On a 16g?

[TkrPerformance]

Yes on a 16g. Mine will hold 30psi on the stock wastegate just on the spring pressuare,but that is a modded ralliart gate

[4g63tcrazy]

I run 32-31psi and drop to 24psi by 7k on my small 16g. Stock internal wastegate.