MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Turbo / Engine / Drivetrain

Reply
 
Thread Tools Display Modes
Old 09-09-2006   #1
eclipse_spyder
The most ricest dsm
 

Join Date: Mar 2006
Location: little canada
Posts: 237
2.4l???

ok so im still a noob about dsm's. what does it mean when the say its a 2.4 liter stroker??? did they just put in the crankshaft stroker kit in the 2.0 block? or did they change the block too?
eclipse_spyder is offline   Reply With Quote
Old 09-09-2006   #2
iceminion
 
iceminion's Avatar
 

Join Date: Oct 2004
Location: Maple Grove
Posts: 956
Send a message via AIM to iceminion
Re: 2.4l???

using the 2.0 block you can put a "stroker" crank kit in it to achieve 2.3 or 2.4L displacement. this = $$$$$$.

But 9 times out of 10 they are talking about the 4g64. (same as g4cs)

The process involves finding a 91 hunday sonata, taking the motor.

Using only the block and the crank from the hunday, add all of the stuff from your 2.0 (head, water pump, oil squirters, oil pan, timing junk, etc...) to the 2.4.

TAADAAAAA!! you have a 2.4 monster motor. (you will also NEEEEEED new pistons)

Seems complicated, but its totally worth it, I shall have on sooner or later.
__________________
building a 3000GT AWD Turbo.
iceminion is offline   Reply With Quote
Old 09-09-2006   #3
sleepydsm
Kevin
 
sleepydsm's Avatar
 

Join Date: Jan 2004
Location: Shoreview
Posts: 3,356
Send a message via AIM to sleepydsm
Re: 2.4l???

There are MANY cars you can find a 6bolt 4G64. I see one or two just sitting in junkyards all the time. As he said, most of the time when someone is talking about the "2.4L" they mean they have a 2.4L block from one of mnay non-turbo cars. Then you put in low compression pistons, and the DOHC turbo head bolts right on, as well as pretty much everything else. So, you basically "swap blocks" to get a .4L increase in displacement. And with our little 4 bangers, every little increase helps!
__________________
Misses the Mitsu Community
Currently on Corvette #4
sleepydsm is offline   Reply With Quote
Old 09-09-2006   #4
1ViciousGSX
Admin
 
1ViciousGSX's Avatar
 

Join Date: Oct 2003
Location: Sportsman's Paradise, LA.
Posts: 5,382
Re: 2.4l???

Adds 50 hp & 70 lb/ft
__________________

"You don't have a clue. You couldn't get a clue during the clue mating season in a field full of horny clues if you smeared your body with clue musk and did the clue mating dance."

When she get's bitchy, SPANK THAT ASS!
(#Y#)
1ViciousGSX is offline   Reply With Quote
Old 09-09-2006   #5
96 Gsx Awd
 
96 Gsx Awd's Avatar
 

Join Date: Dec 2005
Location: Shakopee,Mn
Posts: 33
Send a message via AIM to 96 Gsx Awd
Re: 2.4l???

You shoudeve researched about 2.4 litter swap in the search section of forums, but minion pretty much cleared it up for you.
__________________
Finally tuned and fully built, Takes a lot of time,patience and money!!
96 Gsx Awd is offline   Reply With Quote
Old 09-09-2006   #6
eclipse_spyder
The most ricest dsm
 

Join Date: Mar 2006
Location: little canada
Posts: 237
Re: 2.4l???

thanks for the helpful info guys. now i want that block. if you guys know anyone with one for sale, lmk.
eclipse_spyder is offline   Reply With Quote
Old 09-09-2006   #7
eclipse_spyder
The most ricest dsm
 

Join Date: Mar 2006
Location: little canada
Posts: 237
Re: 2.4l???

Quote:
Originally Posted by 96 Gsx Awd
You shoudeve researched about 2.4 litter swap in the search section of forums, but minion pretty much cleared it up for you.
well i couldnt really find any info...but now i know
eclipse_spyder is offline   Reply With Quote
Old 09-09-2006   #8
eclipse_spyder
The most ricest dsm
 

Join Date: Mar 2006
Location: little canada
Posts: 237
Re: 2.4l???

"you will also NEEEEEED new pistons"

for this, will any of the aftermarket eclipse pistons fit in it like ross pistons or other brand?
eclipse_spyder is offline   Reply With Quote
Old 09-09-2006   #9
eclipse_spyder
The most ricest dsm
 

Join Date: Mar 2006
Location: little canada
Posts: 237
Re: 2.4l???

also is a 4g64 block only from spyder's? can you just put a 1g turbo head on it?
eclipse_spyder is offline   Reply With Quote
Old 09-10-2006   #10
iceminion
 
iceminion's Avatar
 

Join Date: Oct 2004
Location: Maple Grove
Posts: 956
Send a message via AIM to iceminion
Re: 2.4l???

Spyders have a 7 bolt motor......people usually dont upgrade those. I am not saying it cannot be done, I am just suggesting that you go 6 bolt.

4g64 usually means 7 bolt.
g4cs usually means 6 bolt.
__________________
building a 3000GT AWD Turbo.
iceminion is offline   Reply With Quote
Old 09-10-2006   #11
turboimports
 
turboimports's Avatar
 

Join Date: Aug 2004
Location: St. Paul, Minnesota
Drives: DSM and Mitsu history
Posts: 444
Re: 2.4l???

4G64 from the mini-vans.....Find the 6-bolt one.
turboimports is offline   Reply With Quote
Old 09-10-2006   #12
eclipse_spyder
The most ricest dsm
 

Join Date: Mar 2006
Location: little canada
Posts: 237
Re: 2.4l???

which cars did the 4g64's come in....i did some researchs and they said the older galants and expo's has them. which one would be the best ones?
eclipse_spyder is offline   Reply With Quote
Old 09-10-2006   #13
Jakey
Asshat King
 
Jakey's Avatar
 

Join Date: Oct 2003
Location: Decorah / Ames, Iowa
Posts: 3,683
Send a message via MSN to Jakey
Re: 2.4l???

Quote:
Originally Posted by eclipse_spyder
which cars did the 4g64's come in
Chevy Malibus, Dodge Rams, and John Deere 8530 tractors.
__________________
DSMSTYLE MAFIA - Holdin' Down the Cornfields of IA
'92 Laser RS AWD & '01 Grand Prix GTP

Proud to be a Cyclone

Check it out: Racers Against Street Racing
Jakey is offline   Reply With Quote
Old 09-14-2006   #14
mike55112
 
mike55112's Avatar
 

Join Date: Sep 2006
Location: new brighton
Drives: 04 evo
Posts: 1,212
Re: 2.4l???

I know that you can get a 4g64 block from pretty much any junk yard for cheap!
mike55112 is offline   Reply With Quote
Old 09-14-2006   #15
mike55112
 
mike55112's Avatar
 

Join Date: Sep 2006
Location: new brighton
Drives: 04 evo
Posts: 1,212
Re: 2.4l???

Or you can spend more money and get a fully built one!
mike55112 is offline   Reply With Quote
Old 09-14-2006   #16
Shane@DBPerformance
formerly ecoli
 
Shane@DBPerformance's Avatar
 

Join Date: Oct 2003
Location: On the dyno
Posts: 4,892
Send a message via AIM to Shane@DBPerformance
Re: 2.4l???

Does your Eclipse Spyder have the 2.4l in it already or do you have a turbo motor? I kinda like the 7-bolt 2.4ls, especially with all the 6-bolt 2.4l crank failures.
__________________
www.dbptuning.com
Shane@DBPerformance is offline   Reply With Quote
Old 09-14-2006   #17
niterydr
back in the saddle again
 
niterydr's Avatar
 
24 Hours Rally Champion! 3D Pacman white house edition Champion! 3D Racing - Track 2 Champion! ATV Winter Challenge Champion! Bloody Pingu Champion! WRX Racing 2 Champion!
Tournaments Won: 5

Join Date: Oct 2003
Location: Elkhart Texas
Drives: 2015 Ram Quad Cab Hemi, 1999 FRC Corvette, 93 Stealth Turbo
Posts: 6,411
Send a message via AIM to niterydr
Re: 2.4l???

The 6 bolt 46g4's are most commonly found in the 89-91 Hyundai Sonata's. There are a few other colt's, minivans, and other passanger cars that contained both the 6 and 7 bolt flavors.
__________________
My street car runs low 11's and my race car's personal best is a mid 11....
niterydr is offline   Reply With Quote
Old 09-15-2006   #18
Gravy
Who's this guy?
 

Join Date: Apr 2006
Location: Saint Cloud
Drives: 91 Dodge Stealth RT/TT
Posts: 743
Send a message via AIM to Gravy Send a message via Yahoo to Gravy
Re: 2.4l???

Correct me if i'm wrong, but don't all 4g64's have the right block to do so? If so, i've got 3 of them in the local junk yards in the form of 6 bolt Mighty Max engines.

Also, for the 2.3 stroker, isn't it the 4g63 block with a different crank in it? Or was i reading something while drunk?
__________________

Last edited by Gravy; 09-15-2006 at 12:47 AM..
Gravy is offline   Reply With Quote
Old 09-15-2006   #19
tim
..
 
tim's Avatar
 

Join Date: Oct 2005
Location: Mondovi, Wi
Posts: 1,326
Re: 2.4l???

Quote:
Originally Posted by Gravy
Correct me if i'm wrong, but don't all 4g64's have the right block to do so? If so, i've got 3 of them in the local junk yards in the form of 6 bolt Mighty Max engines.

Also, for the 2.3 stroker, isn't it the 4g63 block with a different crank in it? Or was i reading something while drunk?
2.3l is the 4G63 with a different crank, correct.

I thought Mighty Maxs used the Starquest engine though? Maybe I am wrong?
tim is offline   Reply With Quote
Old 09-15-2006   #20
Goat Blower
aka Goodbye
 
Goat Blower's Avatar
 
Asteroids Champion! Beach Squirter Champion!
Join Date: Oct 2003
Location: under the car
Drives: Taylor Made R15
Posts: 7,765
Re: 2.4l???

Only a few of the 2.4's out of various cars will bolt up to our trannies. That's why the Hyundai one is popular. I'm definitely a big fan, I love mine.
__________________
2009 Corvette Z51-SOLD
1992 Mitsubishi Eclipse GSX-SOLD
2013 BMW Z4-Current summer hooptie
2017 GMC Yukon-Current winter hooptie

Goat Blower is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:34 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.