04-16-2006
|
#1
|
|
Been there, done that.
Join Date: Oct 2003
Location: Winona, MN
Posts: 130
|
10 Second Pass on FP3052
Yesterday the Eclipse finally ran a 10 second pass at the track with the FP3052. The 60ft times were low 1.7s. After about 15 passes and a few issues involving crappy driving the car finally ran a 10 second pass. The end result was a 10.971@128.90 and it was backed up with a 11.013@128.33. There was no nitrous used, the boost was at 31psi, AFR was around 11.9:1, timing maxed about at 18 degrees and the car weighed 2980 with driver.
The mods are: Engintecs Built 2.0 (Ross/Eagle, FP2 Cams, Double springs), Quartermaster twin-disk, DevoTuning built tranny, 850cc injectors, Aeromotive AFP, Supra pump, DSMLink, Magnus SMIM, Spearco 2-216, MAFT, Zeitronix Wideband, KYB AGX, Falken Azenis 205/55/16.
Here are the timeslips:
__________________
Manual 859.8WHP / 642 ft/lbs
10.23@152
Automatic 728WHP / 517 ft/lb
9.85@143
1G DSM Crossmembers
BulFab
|
|
|
|
04-16-2006
|
#2
|
|
..
Join Date: Oct 2005
Location: Mondovi, Wi
Posts: 1,326
|
Re: 10 Second Pass on FP3052
Looks good. You have been trying for that 10.xx for a little while now havent you? Congrats.
|
|
|
|
|
04-16-2006
|
#3
|
|
formerly ecoli
Join Date: Oct 2003
Location: On the dyno
Posts: 4,892
|
Re: 10 Second Pass on FP3052
Congrats Vassil!!
|
|
|
|
|
04-16-2006
|
#4
|
|
Area code 166 represent
Join Date: Aug 2003
Location: Crystal, MN
Posts: 10,329
|
Re: 10 Second Pass on FP3052
Awesome Vassil!!! You've earned it!
__________________
'16 Focus ST - Daily Duty
'93 mr2 - Track car in progress
|
|
|
|
|
04-16-2006
|
#5
|
|
Been there, done that.
Join Date: Oct 2003
Location: Camden, S.C.
Posts: 3,248
|
Re: 10 Second Pass on FP3052
Sweet! congrats.... And done at Rock Falls too none the less.
__________________
1997 GSX - new ride
1997 GSX - dedicated track car
2004 R6 - sold
1992 GSX - sold
1996 GST - sold
1995 GSX - sold
Best 1/4 - 11.7 on 93oct
Best 1/4 MPH - 120mph
|
|
|
|
|
04-16-2006
|
#6
|
|
Asshat King
Join Date: Oct 2003
Location: Decorah / Ames, Iowa
Posts: 3,683
|
Re: 10 Second Pass on FP3052
F*cking awesome! How many miles does the EnginTecs motor have on it now?
__________________
DSMSTYLE MAFIA - Holdin' Down the Cornfields of IA
'92 Laser RS AWD & '01 Grand Prix GTP
Proud to be a Cyclone
Check it out: Racers Against Street Racing |
|
|
|
|
04-16-2006
|
#7
|
Join Date: Oct 2003
Location: Big Lake MN
Drives: 98 Eclipse GSX Auto
Posts: 1,516
|
Re: 10 Second Pass on FP3052
Awsome!!!!
|
|
|
|
|
04-16-2006
|
#8
|
Join Date: Oct 2003
Location: Red Wing, MN
Drives: Too Many
Posts: 3,184
|
Re: 10 Second Pass on FP3052
Congrats Vassil. Impressive considering your mod list and turbo. All that on 205s at Rock Falls. Dang.
|
|
|
|
|
04-16-2006
|
#9
|
|
|
Re: 10 Second Pass on FP3052
Congrats Vassil! That is awesome!
__________________
The problem with doing nothing is not knowing when you're finished.
|
|
|
|
|
04-16-2006
|
#10
|
|
Unsure resident asshole
Join Date: Mar 2005
Location: MN
Drives: '92 Eagle TalonTSI w/many mods
Posts: 3,696
|
Re: 10 Second Pass on FP3052
jesus vassil! I wish i was there to see this. I hope to see another pass in the future..
-A. Swift (the guy who watched your cute g/f tie a shop rag around that blown coupler that one time last year)
__________________
Black 1GB Mafia #1
744AWHP/526TQ-Shootout mode
639.6AWHP/452TQ-DB's dyno
I wanna go fast.
|
|
|
|
|
04-16-2006
|
#11
|
|
Reynolds number user
Join Date: Oct 2003
Location: grove/tempe
Posts: 3,553
|
Re: 10 Second Pass on FP3052
that is amazing, seriously.
__________________
07 Ducati Monster S4R
00 honda elite 50 (64 mph braH!)
05 malaguti F15
04 E55 AMG
|
|
|
|
|
04-16-2006
|
#12
|
|
At-Least-It's-White-Again
|
Re: 10 Second Pass on FP3052
Congrats. That's some good drivin.
__________________
'04 Honda Ricer: stock
Done fuckin' with cars but I will snap some photos of yours for now! =)
|
|
|
|
|
04-16-2006
|
#13
|
|
Been there, done that.
Join Date: Oct 2003
Location: Winona, MN
Posts: 130
|
Re: 10 Second Pass on FP3052
Thank you guys. Jakey, the engine has about 23,000 miles on it. It is my daily driver. It took a serious beating yesterday. I was revving it to 9000. The tranny and clutch also held up. The car took it like a champ 
__________________
Manual 859.8WHP / 642 ft/lbs
10.23@152
Automatic 728WHP / 517 ft/lb
9.85@143
1G DSM Crossmembers
BulFab
|
|
|
|
|
04-16-2006
|
#14
|
|
Asshat King
Join Date: Oct 2003
Location: Decorah / Ames, Iowa
Posts: 3,683
|
Re: 10 Second Pass on FP3052
Quote:
|
Originally Posted by vassil
Jakey, the engine has about 23,000 miles on it. It is my daily driver. It took a serious beating yesterday. I was revving it to 9000.
|
It's great to see Mitch's work proving itself so well.
__________________
DSMSTYLE MAFIA - Holdin' Down the Cornfields of IA
'92 Laser RS AWD & '01 Grand Prix GTP
Proud to be a Cyclone
Check it out: Racers Against Street Racing |
|
|
|
|
04-16-2006
|
#15
|
|
AznKraut
Join Date: Feb 2006
Location: Stillwater
Drives: '03 325i, '98 Ranger '03 Duramax
Posts: 1,374
|
Re: 10 Second Pass on FP3052
Damn! That's totally awesome man. Great driving! As we know, RFR isn't the BEST kept track. So more power to ya!
__________________
A//// Guy: putting a dsm on a website as your fleet vehicle is like asking people to shop elsewhere
|
|
|
|
|
04-16-2006
|
#16
|
|
aka Goodbye
|
Re: 10 Second Pass on FP3052
Damn, nice work Vassil. Looks like us big turbo guys are all out of excuses at RF.
__________________
2009 Corvette Z51-SOLD
1992 Mitsubishi Eclipse GSX-SOLD
2013 BMW Z4-Current summer hooptie
2017 GMC Yukon-Current winter hooptie
|
|
|
|
|
04-16-2006
|
#17
|
|
|
Re: 10 Second Pass on FP3052
Congrats Vassil! I wish I would have known you were running so I could have joined the fan club! Good work on the 10... I knew you'd get it.
__________________
Quote:
|
Originally Posted by shoutbox
cmspaz: Someone buys me a rubber fist, and I'll rock it on my hood.
|
|
|
|
|
|
04-17-2006
|
#18
|
Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,908
|
Re: 10 Second Pass on FP3052
Congrats, you must of done that 11.0 run just as i left. i wish i would of stayed to see that. Good work.
|
|
|
|
|
04-17-2006
|
#19
|
|
flips McGee
|
Re: 10 Second Pass on FP3052
Nice work man!
|
|
|
|
|
04-17-2006
|
#20
|
|
Been there, done that.
Join Date: Oct 2003
Location: Winona, MN
Posts: 130
|
Re: 10 Second Pass on FP3052
Thanks again, guys. Here is a video of the passes. It is about 29MB or so.
http://video.google.com/videoplay?do...90565284035341
__________________
Manual 859.8WHP / 642 ft/lbs
10.23@152
Automatic 728WHP / 517 ft/lb
9.85@143
1G DSM Crossmembers
BulFab
Last edited by vassil; 04-18-2006 at 05:15 PM..
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
Linear Mode
