*CANCELED*July 17 DSMStyle.com Dyno day @ Elite Autosport

[Shane@DBPerformance]

Originally Posted by Carlos

So on the "no tuning part." There will be time to check the o2 readings and just do a couple quick adjustments between runs right??? Or else everyone would only need one pull.

Yea, there will be a few moments between pulls. Most people want to do 2 or 3 baseline pulls even if they aren't changing settings, because cars don't do the same thing everytime. Turbo cars are especially sensitive to heat buildup. So people will often do a cool run and then instantly backup it up with some hot runs to see how the power and fueling changes when the car is hot.


It doesn't look like I will be able to dyno either after breaking another built tranny. I was hoping to knock Brent's old AWD number down.

[clean2g]

I'm ready, just don't know if I made the list or not.

[Jana]

You have a pretty good chance considering the number who appear won't be ready on time.

[TheBlizzard]

I might get up there and do a few pulls in the Laser to see how good of a tune it has right now after the new injectors and AFC.

[JET]

Alright, this lit a fire under my ass! It looks like I might have a shot to have the car running this weekend if everything goes well. Now I just have to get a hold of Shane to see if I can get some tuning done next week!

[Onefast99gsx]

Never dyno'd my car before. Say I drove up there, what would i have to do to pre-prep my 99GSX before she could go on the dyno? I'd be coming from WI, so it's not like i would want to tear too much apart.

Thanks.

[Jana]

You'd have to be converted to FWD prior to dynoing, and be sure your name is on our list, which means you need to be sure you are going to do it or not...

[AJ]

At this point I don't want any maybe's. Honestly we get that to often. But the fact is the more people that are on the list ready to rock means the more people we can get on the dyno.

Onefast99gsx: If your coming from WI and want to dyno all I need to know is how serious you are. You'd need to have a welded VC and be able to convert the car to FWD before heading on the dyno. If it needs to be done in the parking lot bring a jack and jack stands and tools.

I don't want everyone looking to Eltie to pass out tools for working on cars.


Again we have current list. This week I will contact everyone on the list via PM to confirm by sunday. So if you still want to be added let me know.

[Onefast99gsx]

My dyno time doesn't by no means have to be on the 17th. On the 16th i plan to spend all day at Rock Falls test and tune day so a day at the dyno would probably just be too much to do in that same weekend. Saying that though, i want to have it done at some point in the near future. I was mearly inquiring about what's involved. I would need to see where i can get a welded VC firstly. Dropping the transfer case could be done pretty easily.

[TheBlizzard]

Just PM someone from Elite or give them a call and set up a time to get on the dyno for tuning. Check out their member section on this site for times and pricing.

[Onefast99gsx]

Thanks Craig. Probably Shane i suppose would be the one to help me tune this car out. At least i think that's who helped Brian make 456whp out of his car.

[AJ]

Originally Posted by JET

JET, DSM, AWD - if that doesn't run, then:

JET, Chevy 3/4 ton, RWD

What if neither run? LOL

[TheBlizzard]

I live with him and I am even wondering how his DSM is going to have a chance of running this weekend?

[JET]

Originally Posted by DSMStyle

What if neither run? LOL

Then 92 sentra?? I really think the silver car will be going as long as Mike can get me the stuff back from the machine shop as quick as he says he can! I have faith Mike!

[StealthGST]

Ah, I wanna join but my car needs to be tuned, so my joining this even all depends on if I can get the thing running right (and tuned by you guys) first.

You guys were gonna tune it for me today, but I had to postpone it once again for typical dsm style trouble...

[JET]

Well, take me off the list. Shane is booked out for 2 weeks, so I can't get my car tuned before the dyno day. That is alright, now I don't have to bust ass to get it ready. I wish I would have known that the last few nights though, I haven't gotten over 4 hours of sleep all week!!

[AJ]

Originally Posted by clean2g

I'm ready, just don't know if I made the list or not.

This is actually what I have right now with DSMs having full Priority. Any RWD car (Quest's) will be done after if time allows. So with everyone on this list 12 and half already being FWD we should be able to move things along smooth. Femember you AWD can drop the driveshaft at home as well so you don't have to deal with anything in the parking lot.

I WOULD LOVE A PM from anyone on this list and an honest update. I won't mind someone not being able to dyno, but please give us notice if there is a change.

*blageo23 - Mike - FWD DSM
*carltalon - Carl - FWD DSM
*EclipseGST - Jake - FWD DSM
*dsm95gsxer - Brent - FWD & AWD DSM (Not sure which is going to be used)
*Nash - Andy - AWD DSM
*TalonFiero - Jim - AWD DSM
*slowbubblecar - James - FWD DSM
*CarPsyco84 - ? - AWD DSM
*StealthGST - Jamie - FWD DSM

--RESERVE--
Grey Wolf - Reid - RWD Quest
Conquests Are Better - Andrew - RWD Quest
TalonTSiDude - Chris - RWD S2000
1Quick4 - Brian - RWD Chevelle

[clean2g]

well.. you can take me off the list, i just found out i have a calc final monday morning.. friggin school.

[AJ]

Originally Posted by clean2g

well.. you can take me off the list, i just found out i have a calc final monday morning.. friggin school.

YOu sure? I can make your you are abel to dyno early if you need to leave early.

[Alpine TSi]

I'm out, ran into some unexpected reassembly parts costs that aren't in my budget. I should be able to make it up there as a spectator though.