GheyrodX - bigger, fatter, gheyer! - Page 12

**cmspaz** · 10-29-2010

You put a tennis ball through it yet?

Rmondoh · 10-29-2010

Oh wow, they actually changed the logo orientation! Did you specifically ask for that or not? I recall from the picture you linked me of Scheides' pipe, the logo is upside down once installed.

Looking forward to helping you install this and the FMIC! (well not really the o2/dp, but I WILL be there to help out regardless

)

**Kracka** · 10-29-2010

Quote:

Originally Posted by cmspaz

You put a tennis ball through it yet?

LOL no, but it's a full 3" the entire way through including the flex section. Looking inside it, I was shocked and how smooth the interior of the flex was. I really like this piece, high quality fabrication and components went into it.

Quote:

Originally Posted by Rmondoh

Oh wow, they actually changed the logo orientation! Did you specifically ask for that or not? I recall from the picture you linked me of Scheides' pipe, the logo is upside down once installed.

Yup, I did specify to flip the logo compared to Scheides' pipe.

Quote:

Originally Posted by Rmondoh

Looking forward to helping you install this and the FMIC! (well not really the o2/dp, but I WILL be there to help out regardless

)

Much appreciated

Maybe we'll do the intercooler next weekend...not sure on the downpipe since I need to get it coated first. I might tackle the urethane exhaust hangars tomorrow before your tune when you're over for 3-port and BOV install.

**Kracka** · 10-31-2010

GheyrodX will be going though some changes over these next two weeks:

intercooler
o2/downpipe
3-port (Cobb won't tune with a MBC)
Cobb tuned

Rmondoh · 11-01-2010

Quote:

Originally Posted by Kracka

GheyrodX will be going though some changes over these next two weeks:

intercooler
o2/downpipe
3-port (Cobb won't tune with a MBC)
Cobb tuned

And I'll be there for every bit of it!

t-revzr · 11-01-2010

cobb tuned? They must be good if your going to get tuned by them.

Rmondoh · 11-01-2010

Quote:

Originally Posted by t-revzr

cobb tuned? They must be good if your going to get tuned by them.

They are pretty darn good. They have done all my tuning. You can check out the detailed post I made about my mod progress/process at this particular post:

http://www.mitsustyle.com/forums/sho...&postcount=129

GG_9_SE · 11-01-2010

Why won't they tune a MBC? Shouldn't it be customer preference? Seems kinda ghey to me.

**Kracka** · 11-01-2010

Quote:

Originally Posted by GG_9_SE

Why won't they tune a MBC? Shouldn't it be customer preference? Seems kinda ghey to me.

Tuner choice...it is what it is I guess. My car just isn't happy right now and whatever it is, all the cars that Cobb tunes churn out great results. I've talked to the guys up at Cobb quite a few times now and I do trust the work their tuner (Calvin) does.

Nothing against Shane at all; he did wonderful work on my IX and Janelle's WRX and if he wasn't 1,000 miles away I'd be going back to him with my revised setup. I just have no interest in driving up in winter/potential winter conditions on worn stock Advans. I will be sad to lose my ECUFlash/Tephra though! I suppose I could always carry the tune over from the AP to ECUFlash and still take advantage of Tephra

**Shane@DBPerformance** · 11-01-2010

He can get more midrange and maybe more top end boost with the EBC though, the stock X turbo drops boost like a rock a little after spoolup and needs a lot of overcompensation to help it.

GG_9_SE · 11-01-2010

That's true, but will they only tune an X with a EBC, or do they require all the cars they tune to have them.

**Kracka** · 11-01-2010

Quote:

Originally Posted by GG_9_SE

That's true, but will they only tune an X with a EBC, or do they require all the cars they tune to have them.

3-port or stock BCS on X's and Subarus. I honestly don't know when it comes to older Evos and the other cars they support (G/Z, Si, MS3, GTR, etc).

**Shane@DBPerformance** · 11-01-2010

They dropped support for the Evo 8/9 Accessports a bit ago, maybe they don't want to touch them at all.

**Kracka** · 11-01-2010

Quote:

Originally Posted by ecoli

They dropped support for the Evo 8/9 Accessports a bit ago, maybe they don't want to touch them at all.

They still tune 8/9's with the AP's. They actually have a customer looking for one so he can get tuned if anyone knows of a used one for sale...

DoughtCom · 11-01-2010

WTF You're going to AP? Man first you go from a IX to a X and now this, I just don't know you anymore Hughes

**mlomker** · 11-01-2010

Quote:

Originally Posted by DoughtCom

I just don't know you anymore Hughes

It wasn't that long ago that we had vicious debates about 3ports. I find the irony delicious.

I should probably payban Kracka, just on principle.

GG_9_SE · 11-01-2010

Wasn't there an AP for sale on evomn a few months back?

**scheides** · 11-01-2010

I think he's somewhat crazy too but I ain't hatin. End of the day if he hates the BCS and/or accessport he can sell it and be right back where he started.

**Kracka** · 11-04-2010

Quote:

Originally Posted by GG_9_SE

Wasn't there an AP for sale on evomn a few months back?

No response from him, I tried. Thanks though.

Quote:

Originally Posted by mlomker

It wasn't that long ago that we had vicious debates about 3ports. I find the irony delicious.

LOL I'm just at the point of not wanting to mess around with my car. I see an opportunity to potentially pick up a nice chunk of power so I'm going for it. I'll definitely report back with results next weekend (Sat Nov 13th).

Quote:

Originally Posted by scheides

I think he's somewhat crazy too but I ain't hatin. End of the day if he hates the BCS and/or accessport he can sell it and be right back where he started.

For sure, worst case I can sell the new setup and go back to the old if I'm not happy with it. The actual tunes are free so all I'm buying is the AP which can be resold.

**Kracka** · 11-06-2010

MAP FMIC finally installed!

Fitment of this thing was perfect. Since it was made for a 2008 and I have a 2010 (different intercooler brackets) I had to drill a single hole and use a self-tapping screw to secure it to the chassis which was ultra easy. It's mounted rock solid, is even, and almost exactly centered.

Thanks to Tom and Armando for stopping over to lend a hand