timing marks on cam gears

[Shane@DBPerformance]

~10 inches is normal for cams with a low idle. The vacuum will depend a lot on what RPM the car is idling at. You might get 16 at 1050 and 10 at 800.

Only go by the 2 inner marks on the cam gears, the outer marks will not lineup correctly with the head.

The ticking noise from the PCV valve is 100% normal when you put in cams. The fix is to put a breather port on there instead and run it to a catch can.

[Enes]

Originally Posted by ecoli

Only go by the 2 inner marks on the cam gears, the outer marks will not lineup correctly with the head.

aren't they suposed to line up with each other? all 4 in a line?

how are you aligning them with the head?

-E