Bastard 20G?

slowbubblecar · 06-19-2005

If you go with the PTE 50 trim, you will need to block off the coolant lines as they do not take coolant lines. You will also need an oil line kit and possibly have to order a cast elbow to be welded on hte outlet pipe.

This is Carlos posting under James' name...

howslowcanyougo · 06-19-2005

Thanks much for all the great input gents.

I agree that the SBR Bastard 20G looks to be overpriced vs the EVO3.

I like the ease of install for the EVO3, but really would like a bit more power?

Also still kind of spooks me not have any water cooling, as I would like to keep this turbo going for a while?

A standard 20G uses water cooling, and should be good for about ~450 HP right or?

What are the details to swap in a 20G as far as the lines, and elbows?

TIA.......

howslowcanyougo · 06-20-2005

Did some more digging, and finally decided on this one, in prep for next year.

<Jet, you know atleast I didn't go with the V Trim..........:->

http://www.slowboyracing.com/more.php?id=2198&

Damm the the Torpeados.....