Re: Slimline fan Wiring hookup.
I decided to tap into this thread because it deals with what i'm inquiring on. I have on my 99 GSX a PTE 50trim turbo with the stock 2g mani. It's internal gated. From the edge of the wastegate vacuum actuator part there is 2" from there to the radiator. I need to know what fan will work for me. Summit has alot but the smallest is like 2.8". I don't know if they mean that is the overall thickness in the center where the motor is or what? Or does it taper smaller towards the end. I was thinking about a 12" fan. I think if it were a 10" it would clear but then i have less cooling area. Anyone have my similar setup and run a Flex-a-lite FAL type fan. Let me know what you have.
Thanks.
|
Hybrid Mode
