MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Turbo / Engine / Drivetrain

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-30-2005   #11
Nash
 
Nash's Avatar
Re: Clutch Problems

Try adjusting it again. Like I said before, mine did the same thing. I just kept adjusting it and after a few times it was fine. Or you could have ghost pedal.
On very light foot pressure on a 2G the pedal drops to the floor all by it's self. ?? Yes. On a regular pedal push, the seal seals fine and the clutch works normally. On a very light push, the seal does not seal well and fluid will bypass it. Since the 2Gs have a heavy assist spring, the additional assist is enough pressure to keep the pedal going towards the floor all alone. Quite disturbing to watch. Replacing or rebuilding the master cylinder will fix this.

Try this link there are some tips on getting you clutch adjusted right.

__________________
The problem with doing nothing is not knowing when you're finished.

Last edited by Nash; 04-30-2005 at 05:06 AM..
Nash is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 03:11 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.