After 2 hrs worth of degreasing my car, I took another look at it. It looks like the o-ring seal pushed it's way out of the sealing groove. I had hand tightened it really tight, but it looks like not enough. I think the pressure caused to oil filter to push away from the sealing surface which allowed the o-ring to come out of place.
Well at least I get to keep going and don't have to tear the engine down.
__________________
"You don't have a clue. You couldn't get a clue during the clue mating season in a field full of horny clues if you smeared your body with clue musk and did the clue mating dance."
When she get's bitchy, SPANK THAT ASS!
(#Y#)
Threaded Mode