pump and install kit
pump with sock they sent. As you can see its going the wrong way so you can use the rubber gromment for the bottom "L" part of the sender.
I actually figured the sock thing out. You just dont use the one they send. Just use the stock one. The stock one sticks off the bottom not go across it.
Install kit
May have figured this out to. I think it requires drilling out the top of the sender and stick the nipple of the pump through. Then hook up the rubber line and clamp down. MAYBE???
plug on pump
Does not plug in like a 255 or dw300 so I guess when you get yours LMK what you do.
I guess I dont understand why they sent the huge sock. But since it goes across the bottom of the pump and not stick out like normal. I may have just over thought that part since the sock came with the kit why wouldn't it work? LOL
Went back out put on a stock sock and its fine but the bottom of the 450lph is bigger than the 255lph so the rubber gromet on the bottom that holds the pump is to small. Is it ok to just use the stock one and wedge it tight with the adjustable "L" bracket.
Any one have any thoughts of what I can do? Should I drill out the sock feed line on the hanger and put the flare fitting through?
Also who sells a bilk hed to convert the pump to an -6an fitting
Threaded Mode