We have a few projects on our hands lately and here is one of them.
Custom wiring harness.
5.7l out of a 2005 CTS-V
We wanted to get rid of all the wires that were no longer needed and also move the ECU from the drivers side fender to the inside of the car. It has taken a couple days working on it on and off but it is coming together very well. Here are some pictures I took with my cell while working on it.
Sorry for the picture quality
Harness after taking the loom off
Passenger Side
Driver Side
Back
With The Covers On
Passenger Side Taped Up
Everything Taped Up
Interior (So Far)
The harness still needs to be loomed. The interior part needs to be gone through and wires shortened as well as re-pinning the ECU.
(The type of car is not listed at this time for a reason)
Threaded Mode