WTB: Engine Coolant Temperature Sensors off 1g

[Pushit2.0]

There should always be engine coolant on both sides of the thermostat, but the coolant on the engine side should be hotter then the radiator side until the thermostat opens. The 2 wire sensor below, which is next to the single wire sensor is the engine coolant temp sensor for the ECU, the single wire sensor is for the temp gauge in the dash. The 2 wire sensor on top for the 1g is for the 2nd radiator fan, which is for when the AC is running, or the temps get hot enough to trigger the 2nd radiator fan.

I should have a few extra coolant temp sensors for both the gauge and ecu for a 1g, let me know if you need one.

~John