GheyrodX - bigger, fatter, gheyer!

[simulatedwood]

From JAG:
Camber F = -2.5 deg
Toe F = -.19 deg
Caster = 4.0 deg
Camber R = -1.5 deg
Toe R = 0 deg

You may want to try maybe slighty less rear camber. The front is actually perfect for DD use with no unusual wear patterns. The 2.5 degress toe was obtained using a bottle jack on the spindle while tightening the flipped strut bolts.

I am also running a perrin rear sway bar with the endlinks set in the middle position on the sway bar. MAP sold me the bar for $169.00.

[mlomker]

Originally Posted by simulatedwood

I am also running a perrin rear sway bar with the endlinks set in the middle position on the sway bar.

+1. The bolts that they send with it are a little annoying but it's a very nice mod that's cake to install.

[Kracka]

Originally Posted by mlomker

+1. The bolts that they send with it are a little annoying but it's a very nice mod that's cake to install.

Definitely easy. I installed a Cobb rear bar on a local X MR (stock springs) and it took me a total of 10 minutes to drop the stock bar and install the Cobb bar.

[mlomker]

Originally Posted by Kracka

took me a total of 10 minutes to drop the stock bar and install the Cobb bar.

Pulling the exhaust is pretty much all the time spent on it.

The Swifts are certainly the most popular.

[Kracka]

Originally Posted by mlomker

With a dual-exit exhaust you definitely have to drop it but maybe you could work around a single can.

This was with the stock exhaust, luckily clearance was great.