Evo X upgrades - Page 33

**scheides** · 05-08-2010

When are you going to see jeff? I like the offset on these, seems just right.

**mlomker** · 05-08-2010

Quote:

Originally Posted by scheides

When are you going to see jeff?

No appointment yet. May 24th is my first HPDE @BIR so I'll try to get everything done by then.

**Kracka** · 05-08-2010

Perfect fitment on the wheels! I love it when tires sit flush (or slightly in) with the fenders and don't stick out at all.

Also, just as a little tip, always tighten strut tower braces down with the wheels up in the air, this will take stress off the chassis so the brace holds things in proper place. Obviously this will make a bigger difference in cars without such a stiff and well braced chassis to begin with, but especially when tracking the car every little bit can help.

**mlomker** · 05-08-2010

Quote:

Originally Posted by Kracka

Also, just as a little tip, always tighten strut tower braces down with the wheels up in the air

I assume you're saying to snug them and then torque it in the air? That's a bit too involved for the ramp so I'll have to do it when I have a garage to work in.

**mlomker** · 05-09-2010

Side by side comparison of the stock and APR wings.

123abc · 05-09-2010

Quote:

Originally Posted by mlomker

I assume you're saying to snug them and then torque it in the air? That's a bit too involved for the ramp so I'll have to do it when I have a garage to work in.

You don't have a jack?

**mlomker** · 05-09-2010

Quote:

Originally Posted by 123abc

You don't have a jack?

A rather nice one. I don't want to get evicted from the association for working on my car in the ramp...they will actually foreclose on you. Parking ramps are considered shared space and any mishap would fall under the association's insurance, hence them having no sense of humor.

I'm willing to try my luck on small stuff but jack stands? No.

--

turbotalon1g · 05-09-2010

Were u cruising uni last night?
Some X owner that color was doing pulls up and down uni in his awesomely amazing X

**mlomker** · 05-09-2010

The rear strut tower brace is a bit time consuming since most of the trunk and the back seat back has to come off.

I love the Rexspeed hood dampeners! One is strong enough to hold the hood and they let it down at a proper rate for it to latch.

**mlomker** · 05-09-2010

Quote:

Originally Posted by turbotalon1g

Were u cruising uni last night?

Nope. I'm surprised how many X's are in the Cities but they don't get on the local forums. I've invited a few from the national forums but they aren't interested.

**mlomker** · 05-09-2010

I think I'm going to go get some stuff to debadge the car. Fishing line and adhesive remover? Eh, I'll give it a shot. I have a hair dryer that my ex left here. lol.

HiImBrian · 05-09-2010

I used a heat gun on my car and it worked great. Just be careful not to get things too hot or you might bubble your paint. Heat and flaws or some kinda string works best imo.

turbotalon1g · 05-09-2010

I haven't seen a hood strut mount like that before from the pics it looks kinda cheapy, but it works I would like to see in person.

**scheides** · 05-09-2010

Quote:

Originally Posted by mlomker

I think I'm going to go get some stuff to debadge the car. Fishing line and adhesive remover? Eh, I'll give it a shot. I have a hair dryer that my ex left here. lol.

Yes! Someone just debadged the 'evolution' from my car and I think they used a foking razor blade and a screwdriver, its scraped to shit.

Quote:

Originally Posted by turbotalon1g

I haven't seen a hood strut mount like that before from the pics it looks kinda cheapy, but it works I would like to see in person.

The mynes ones we gave away at the dyno day last year (and several of us have them on our cars) look identical, except for the CF finish on the strut. They're very reliable, and one of mine even survived the barrel roll

turbotalon1g · 05-09-2010

I'm not trying to talk shit, so don't take me wrong but teh way it mounts looks too universal (if that makes sense) I'm sure it looks better in person.

I need to do this, my hood blows up when I fart.

**mlomker** · 05-09-2010

Quote:

Originally Posted by scheides

Yes! Someone just debadged the 'evolution' from my car and I think they used a foking razor blade and a screwdriver, its scraped to shit.

What!? No way. I put a few scratches on the trunk lid getting that black grommet-thing out of the trunk. Luckily that's covered by the wing mount.

I also found a door ding today. I'd hoped I could go a while longer before that happened, but I guess not. Assholes are everywhere.

Quote:

Originally Posted by turbotalon1g

way it mounts looks too universal (if that makes sense) I'm sure it looks better in person.

It's definitely universal. So is the wing I just bought, excepting the mounts. Same sort of deal. They'd never make enough money doing something custom just for an Evo X.

**scheides** · 05-09-2010

Quote:

Originally Posted by mlomker

What!? No way.

LOL, I wasn't kidding when I dubbed it 'beaterX.' When you see it in person, its filled with dings and scratches.

**mlomker** · 05-10-2010

I'm going to drop the car off with Shane for a few days next week...he's going to find some time for the tune. Awesome!

I sent Jeff an email for an appointment.

I'm going to pull the fuel pump tonight to get the suction line back in there. It'll be nice to reinstall the back seat, anyway, since it does keep some noise out of the car.

**Murlo26** · 05-10-2010

Sweet! Can't wait to see your results.

slowbubblecar · 05-10-2010

Quote:

Originally Posted by mlomker

No appointment yet. May 24th is my first HPDE @BIR so I'll try to get everything done by then.

Hope you went through track time to save a few bucks. If you didn't, maybe you can change your date if you already paid and re-register through track time. All track time does is make it slightly cheaper to run the same events.

http://www.tracktimemotorsports.net/payment.html