holset question

[GnArKiLl]

Originally Posted by Halon

Yeah that might be tricky. Something to consider is juts getting a straight adapter fitting, and using that with a feedline that has a 90* -4an end on it. That's how mine is setup.

that would work but i have to run an oil restrictor at the turbo. i think it will be to tall.

[sleepydsm]

Originally Posted by GnArKiLl

that would work but i have to run an oil restrictor at the turbo. i think it will be to tall.

I have an "Extreme PSi" oil feed line from the oil filter housing with a holset adapter fitting. I use an FP journal bearing restrictor.

I have the 90 degree fitting on the OFH, then the FP restrictor/filter attached, then the -4an line which goes to the a built in 90, then the M12x1.5 adapter on the turbo.