Considering stroker, looking for feedback

[Super Bleeder!!]

Originally Posted by Halon

And I don't want a 2.4 block because I just want to keep the stock block the cars came with. Out of curiosity, what advantage does the taller deck height offer?

Improved rod ratio, less cyl wall loading (scuffing) Rings and compression should last longer.

[blackawdtsi]

Originally Posted by Super Bleeder!!

Improved rod ratio, less cyl wall loading (scuffing) Rings and compression should last longer.

2.4s DO NOT have better rod ratio compared to a 2.3. They use a 100mm crank, just like a 2.3 and the rods are the exact same length (150mm) as a 2.3. However the 2.3 will have lighter pistons, so it's better for high rpms.

UNLESS you're using stroker pistons and longer rods in the 2.4.