My Pile Won't Start!

[Halon]

So it ran before. And all you did was swap in a new fuel pump, and messed with the MAFT wiring, and now it doesn't work?

Have you checked to make sure the MPI fuse isn't blown? Have you checked to make sure you didn't knock any connectors loose while doing any of this? Do you have good compression? Have you tried playing with the gas pedal while trying to start it? I believe if you hold the gas all the way down while turning it over, it should shut the injecors off, which may be useful if everythings all flooded. Do you have an extremely high coolant temperature reading on whatever logging application you have? Do you have a spare ECU you can swap in? Are you certain you are getting spark?