MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Turbo / Engine / Drivetrain

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-29-2003   #8
Shane@DBPerformance
formerly ecoli
 
Shane@DBPerformance's Avatar
 

Join Date: Oct 2003
Location: On the dyno
Posts: 4,892
Send a message via AIM to Shane@DBPerformance
Quote:
Stock headbolts and your pushing 25+ PSI?? Ughh I dont think that the 2g bolts are much, if any, stronger than 1g bolts...
The 92.5+ bolts are weaker due to being a 1mm smaller.

Bad injectors? Are they black from fuel or oil?

Semi-blown headgasket? Might only be blown enough to cause problems at high boost, but that might just cause it to overheat a little and push coolant, but not misfire.

Are you I/C pipes free of oil? A little oil from a slightly blown turbo seal or accumulated in the intercooler can cause misfires under boost.
__________________
www.dbptuning.com
Shane@DBPerformance is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:45 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.