*New Product* MAP Integrated O2 Housing / O2 Eliminator Downpipe for Evolution 8/9

[Kracka]

I helped DoughtCom his today and overall the install went smoother than I expected. He has the prototype 2.5" version that expands to 3" after the 90* bend which I'm sure made the install a little easier. We did not have to remove the A/C, exhaust manifold, or turbo hotside, but we did remove the radiator. Ratcheting wrenches really helped out too so if you don't have a set I recommend at least picking up a 14mm. Also, a very short socket extension or swivel was needed. We of course also used a lot of PB Blaster which really helped when removing the old bolts; upon installation we used plenty of copper anti-seize on everything.