11-15-2008
|
#1
|
Manic Narcissistic
Join Date: Mar 2006
Location: Burnsville
Drives: IS300
Posts: 1,465
|
FS: 1992 Eagle Talon TSi AWD, Blown motor $1,000
Soooo, my wonderful project car pushed a rod thru the back side of the block, and I lost the motivation to fix it. Im not sure on the condition of the head, so Im just assuming its good. Keep that in mind. Im not really too interested in parting the stuff thats on the car out as I dont really have the tools, or space to tear into it too much. But the extra's Ill sell individually for B/O.
The Good, Mods, and Extra's:
Small 16g Turbo with a ported 7cm hotside, 1k miles on a rebuild
FIC 550cc injectors, 5k miles
Fuel Lab AFPR, 4k miles
Walbro 255lph, unkown milage
StarQuest FMIC set up
Tubular Exauhst Manifold
Turbo back 2.5" magnaflow exauhst system
Rebuilt head, 1k miles
8:1 Compression pistons, 1k miles on them, if they are still good.
ARP Head and Main studs
OEM MLS Head gasket, doubt it can be reused but it only has 1k on it, so maybe
New Clutch Master, and Slave Cylinders
Recapped ECU
Autometer Electronic Boost Guage
Blitz Turbo Timer
Interior is in great shape
Exterior is in good shape, a little bit of rust bubbles on the hood, few chips in the paint, overal good shape.
::Extra:: Walbro 195lph, 5k miles
::Extra:: Hyperspeed AV6 17" Rims, bad rubber on them
::Extra:: Mishimoto M-Line FMIC
::Extra:: Pocket Logger set up with knock box
::Extra:: ARP Rod bolts
The Bad:
The block has a hole in it.
I dont really know what to ask for this so shoot me some prices. I was hoping to get at least 1k for just the car. and maybe 1500-1700 with all the extras included.
Ill get some pics up of the car soon, my phone is being gay after I thru it at my cat.
__________________
170whp/163wtq @ MAP (god I miss turbo)
asshanson: emily was grossed out and asked me what kind of movies i'm into, very awkward
Last edited by Febo; 11-15-2008 at 07:25 PM..
Reason: Cuz kracka told me too.....
|
|
|
11-15-2008
|
#2
|
back in the saddle again
|
Re: Feeler/FS 1992 Eagle Talon TSi AWD, Blown motor.
Who did the engine rebuild?
__________________
My street car runs low 11's and my race car's personal best is a mid 11....
|
|
|
11-15-2008
|
#3
|
Manic Narcissistic
Join Date: Mar 2006
Location: Burnsville
Drives: IS300
Posts: 1,465
|
Re: Feeler/FS 1992 Eagle Talon TSi AWD, Blown motor.
I did the rebuild. I tourqued the whole bottom end to spec, so I dont really know what went wrong, it had all new clevite race bearings in the bottom end too. Soo I dont know what happened.
__________________
170whp/163wtq @ MAP (god I miss turbo)
asshanson: emily was grossed out and asked me what kind of movies i'm into, very awkward
Last edited by Kracka; 11-15-2008 at 07:35 PM..
|
|
|
11-15-2008
|
#4
|
Manic Narcissistic
Join Date: Mar 2006
Location: Burnsville
Drives: IS300
Posts: 1,465
|
Re: Feeler/FS 1992 Eagle Talon TSi AWD, Blown motor.
__________________
170whp/163wtq @ MAP (god I miss turbo)
asshanson: emily was grossed out and asked me what kind of movies i'm into, very awkward
|
|
|
11-15-2008
|
#5
|
Kevin
Join Date: Jan 2004
Location: Shoreview
Posts: 3,356
|
Re: FS: 1992 Eagle Talon TSi AWD, Blown motor $1,000
Do you have black leather?
__________________
Misses the Mitsu Community
Currently on Corvette #4
|
|
|
11-15-2008
|
#6
|
Join Date: Oct 2008
Location: Mankato, MN
Drives: 1992 Eagle Talon TSi Awd
Posts: 106
|
Re: Feeler/FS 1992 Eagle Talon TSi AWD, Blown motor.
Quote:
Originally Posted by RLFebo
I did the rebuild. I tourqued the whole bottom end to spec, so I dont really know what went wrong, it had all new clevite race bearings in the bottom end too. Soo I dont know what happened.
|
I'm using oversized Clevite race bearings on Eagle Rods.
Did you use oversized or standard size bearings?
|
|
|
11-15-2008
|
#7
|
Manic Narcissistic
Join Date: Mar 2006
Location: Burnsville
Drives: IS300
Posts: 1,465
|
Re: FS: 1992 Eagle Talon TSi AWD, Blown motor $1,000
Yes, the pictures show its black leather. And I used standard size bearings. Not that it matters anymore as the whole bottom end is more than likely garbage now.
__________________
170whp/163wtq @ MAP (god I miss turbo)
asshanson: emily was grossed out and asked me what kind of movies i'm into, very awkward
|
|
|
11-16-2008
|
#8
|
flips McGee
|
Re: FS: 1992 Eagle Talon TSi AWD, Blown motor $1,000
Damn dude that sucks! I say don't give up, try again. Just get a running stock bottom end and swap it in.
|
|
|
11-16-2008
|
#9
|
Manic Narcissistic
Join Date: Mar 2006
Location: Burnsville
Drives: IS300
Posts: 1,465
|
Re: FS: 1992 Eagle Talon TSi AWD, Blown motor $1,000
No space, time, money, or intrest really to try that.
__________________
170whp/163wtq @ MAP (god I miss turbo)
asshanson: emily was grossed out and asked me what kind of movies i'm into, very awkward
|
|
|
11-18-2008
|
#10
|
Kevin
Join Date: Jan 2004
Location: Shoreview
Posts: 3,356
|
Re: FS: 1992 Eagle Talon TSi AWD, Blown motor $1,000
Quote:
Originally Posted by RLFebo
No space, time, money, or intrest really to try that.
|
Would you trade seats/interior? I have great condition tan leather, but the driver's side seat has a small tear on the bottom seat part (3").
__________________
Misses the Mitsu Community
Currently on Corvette #4
|
|
|
11-18-2008
|
#11
|
Manic Narcissistic
Join Date: Mar 2006
Location: Burnsville
Drives: IS300
Posts: 1,465
|
Re: FS: 1992 Eagle Talon TSi AWD, Blown motor $1,000
Sorry Kevin, but I just sold it off Craigslist.
SOLD
But the exrtas remain. Ill probably start another thread in the parts section to try and push them out.
__________________
170whp/163wtq @ MAP (god I miss turbo)
asshanson: emily was grossed out and asked me what kind of movies i'm into, very awkward
Last edited by Febo; 11-18-2008 at 07:38 PM..
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|