FS: 1992 Eagle Talon TSi AWD, Blown motor $1,000
 

Soooo, my wonderful project car pushed a rod thru the back side of the block, and I lost the motivation to fix it. Im not sure on the condition of the head, so Im just assuming its good. Keep that in mind. Im not really too interested in parting the stuff thats on the car out as I dont really have the tools, or space to tear into it too much. But the extra's Ill sell individually for B/O.

The Good, Mods, and Extra's:

Small 16g Turbo with a ported 7cm hotside, 1k miles on a rebuild
FIC 550cc injectors, 5k miles
Fuel Lab AFPR, 4k miles
Walbro 255lph, unkown milage
StarQuest FMIC set up
Tubular Exauhst Manifold
Turbo back 2.5" magnaflow exauhst system
Rebuilt head, 1k miles
8:1 Compression pistons, 1k miles on them, if they are still good.
ARP Head and Main studs
OEM MLS Head gasket, doubt it can be reused but it only has 1k on it, so maybe
New Clutch Master, and Slave Cylinders
Recapped ECU
Autometer Electronic Boost Guage
Blitz Turbo Timer
Interior is in great shape
Exterior is in good shape, a little bit of rust bubbles on the hood, few chips in the paint, overal good shape.
::Extra:: Walbro 195lph, 5k miles
::Extra:: Hyperspeed AV6 17" Rims, bad rubber on them
::Extra:: Mishimoto M-Line FMIC
::Extra:: Pocket Logger set up with knock box
::Extra:: ARP Rod bolts


The Bad:
The block has a hole in it.

I dont really know what to ask for this so shoot me some prices. I was hoping to get at least 1k for just the car. and maybe 1500-1700 with all the extras included.

Ill get some pics up of the car soon, my phone is being gay after I thru it at my cat.

Re: Feeler/FS 1992 Eagle Talon TSi AWD, Blown motor.
 

Who did the engine rebuild?

Re: Feeler/FS 1992 Eagle Talon TSi AWD, Blown motor.
 

I did the rebuild. I tourqued the whole bottom end to spec, so I dont really know what went wrong, it had all new clevite race bearings in the bottom end too. Soo I dont know what happened.

Re: Feeler/FS 1992 Eagle Talon TSi AWD, Blown motor.
 

Heres the photos of the car, so you can make more educated prices.

http://img151.imageshack.us/img151/1...0360tg4.th.jpghttp://img151.imageshack.us/images/thpix.gif

http://img359.imageshack.us/img359/3...0361vi4.th.jpghttp://img359.imageshack.us/images/thpix.gif

http://img503.imageshack.us/img503/8...0364re6.th.jpghttp://img503.imageshack.us/images/thpix.gif

http://img529.imageshack.us/img529/8...0366mv0.th.jpghttp://img529.imageshack.us/images/thpix.gif

http://img262.imageshack.us/img262/1...0370wk2.th.jpghttp://img262.imageshack.us/images/thpix.gif

http://img378.imageshack.us/img378/5...0369eo9.th.jpghttp://img378.imageshack.us/images/thpix.gif

Re: FS: 1992 Eagle Talon TSi AWD, Blown motor $1,000
 

Do you have black leather?

Re: Feeler/FS 1992 Eagle Talon TSi AWD, Blown motor.
 

I'm using oversized Clevite race bearings on Eagle Rods.

Did you use oversized or standard size bearings?

Re: FS: 1992 Eagle Talon TSi AWD, Blown motor $1,000
 

Yes, the pictures show its black leather. And I used standard size bearings. Not that it matters anymore as the whole bottom end is more than likely garbage now.

Re: FS: 1992 Eagle Talon TSi AWD, Blown motor $1,000
 

Damn dude that sucks! I say don't give up, try again. Just get a running stock bottom end and swap it in.

Re: FS: 1992 Eagle Talon TSi AWD, Blown motor $1,000
 

No space, time, money, or intrest really to try that.

Re: FS: 1992 Eagle Talon TSi AWD, Blown motor $1,000
 

Would you trade seats/interior? I have great condition tan leather, but the driver's side seat has a small tear on the bottom seat part (3").

Re: FS: 1992 Eagle Talon TSi AWD, Blown motor $1,000
 

Sorry Kevin, but I just sold it off Craigslist.

SOLD

But the exrtas remain. Ill probably start another thread in the parts section to try and push them out.