20g Q

**Shane@DBPerformance** · 02-21-2008

What do you mean by a 2G? You don't want to put a 2G motor into a 90-92.

You will need a front mount intercooler, unless you only plan on running 12 psi or less. You will need full turbo back exhaust and an air intake. A tuning system like an Apexi SAFC or DSMLink. Bigger injectors 550cc or bigger, depending on the tuning system you use, the boost you want to run and if it will ever see race gas.

You might need to do some work to the O2 housing setup or get an external wastegate, if boost creep is a problem.

tpunx99GSX · 02-21-2008

Quote:

Originally Posted by ecoli

What do you mean by a 2G? You don't want to put a 2G motor into a 90-92.

yeah you may want to explain that a little more. but what i gathered is that you were putting a 1g block into a 2g body.

**JET** · 02-21-2008

Quote:

Originally Posted by tpunx99GSX

yeah you may want to explain that a little more. but what i gathered is that you were putting a 1g block into a 2g body.

At first I thought what Shane did, but after rereading it, he is do a 6 bolt swap in a 2g. Putting the turbo on and getting the car to run and getting the potential out of that turbo will come up with 2 very different answers. Are you looking at just getting the car to run reliably with the 20g on it or are you looking to use the turbo to near its potential.?