MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Turbo / Engine / Drivetrain

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-18-2004   #4
A//// Guy
 
A//// Guy's Avatar
 
Bloody Seal Bounce Champion!
Join Date: Oct 2003
Location: South Burbs
Drives: Slowly
Posts: 9,870
You dont fix idle using the cable... that is just for slack or if your not opening 100% at WOT. Use the BISS screw on the throttle body to adjust idle. If its dying at idle then its either to low or you have a vacuum leak or something.

White smoke out the exhaust pipe could mean blown head gasket, and coolant is getting burnt. The tube off the valve cover just releases oil when under pressure... mine hangs into the air and is vented to the ground... nothing comes out except a little oil. Normally its plugged into the rubber (stock) intake pipe.
A//// Guy is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:23 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.