What injectors are you running?

[scheides]

If thats the case, then just get some 650's and run them for a while. If you are lucky enough to max them out, then just upgrade.

[A//// Guy]

I think Im running 24lb injectors.

[JET]

If you are running an AEM then you might as well get some decent sized injectors, get some 850's, 950's or 1000's. Whatever you can find a good deal on.

[b00stcreep21]

Your setup will be fine either way, with the 880's or the 1000's. AEM has good enough injector drivers to run the 1k's without a problem

[Pushit2.0]

I said 880s because after that with PTE anyways the price goes up. I ran 880s in my Galant and Talon with an EMS and a 60trim running as much boost as possible, 39.8psi on the street once, and I only used ~90% of the 880s. I did have twin walbros and -6AN lines, base fuel pressure was 43 I think.

~John

[Goat Blower]

I ran 550's with my 20G and never had a problem running out of fuel. 1000cc injectors for that setup is huge overkill and a waste of money unless you're planning on running E85.