What injectors are you running?
I’m curious what size and brand injectors everyone is using. I’m looking at FIC 750cc or 850 even though those injector calculators tell me I need over 1000cc but that seems like overkill.
|
Re: What injectors are you running?
FIC 650cc, May be upgrading to FIC 1000cc
|
Re: What injectors are you running?
What size turbo are you going to run, and on what size motor (stock, stroker, etc?). Also, what fuel do you plan to run on?
I've always gone for the standard 650cc injectors but I've only run 20G turbos and pump gas. If you're going to run anything bigger, high boost, or E85 I'd suggest bigger injectors. I'm currently maxed out on my stock 560's on my evo. I'll probably upgrade to 880's in case I decide to run E85. |
Re: What injectors are you running?
PTE 680s on my 50 trim.
|
Re: What injectors are you running?
Holley Double Pumper
|
Re: What injectors are you running?
880's now, 1600's soon.
|
Re: What injectors are you running?
Quote:
I will be using 750's. I was using a 700 and a 1000, but no more! |
Re: What injectors are you running?
Quote:
|
Re: What injectors are you running?
What setup are you running where you think you'll need 1000cc injectors? I'm gonna go ahead and assume e85....?
|
Re: What injectors are you running?
Hilborn stacks.
|
Re: What injectors are you running?
Right now I have FIC 650's, but my new PTE 1600's will be replacing them soon as I get home.
|
Re: What injectors are you running?
I have been running FIC 950's, but am going to 1600's this year for E85 use.
|
Re: What injectors are you running?
I've got a set of FIC 850's I would sell ya.
I too am going 1600 for Korn |
Re: What injectors are you running?
crower rods
je pistons oversize valves HKS 272 cams AEM standalone EMS AEM adjustable cam gears AEM high flow fuel rail with adjustable regulator Walbro 255 hi-flow fuel pump 550 cc injectors (currently and hit fuel cut) 20g turbo Greddy large front mount intercooler RRE upper and lower pipes Custom 3” downpipe to full 3” exhaust with apexi n1 catback 3" hi-flow cat Not E85, 92. What’s up with everyone running E85? |
Re: What injectors are you running?
8 - PTE1600's
|
Re: What injectors are you running?
If you do not plan on putting a bigger turbo on the car anytime soon I would buy 880s. I have 4 1600s to start, I am sure more will be added later.
~John |
Re: What injectors are you running?
Everyone has a different opinion on injector size its driving me crazy. Some people say you will never max out 650s with a 50 trim and some people say get 880s or 1000cc for a 20g. fuel injector calculators tell you over 1000cc for 400hp with 4 injectors in a turbo application. Every time I think I’ve decided on what I’m going to get I hear something different. I am planning on a turbo upgrade but not for a few years so I’m not just trying to get the best injectors for the 20g. Any input would be awesome.
|
Re: What injectors are you running?
If thats the case, then just get some 650's and run them for a while. If you are lucky enough to max them out, then just upgrade.
|
Re: What injectors are you running?
I think Im running 24lb injectors. :D
|
Re: What injectors are you running?
If you are running an AEM then you might as well get some decent sized injectors, get some 850's, 950's or 1000's. Whatever you can find a good deal on.
|
All times are GMT -5. The time now is 05:33 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.