|
Re: Longer Slave Cyl Rods
Thanks Steve, I'll have to get a buddy to step on the clutch while i look at the travel underneath. I forgot to add in my first post, it has a new pivot ball and clutch fork as well. Would be nice if it's as simple as just adjusting the master cyl rod just a fraction. I know it don't take much. A slight turn makes a huge difference.
*** The reason I asked is because of what i read on ExtremePSI's website.
"When upgrading to any clutch, these extention rod are a must need due to the stock one not being able to disengage fully."
|
Threaded Mode