MAFT Pro

[blackrosenova400]

I run the maft pro/speed density+keydiver chip ot control wot timing. Plus im running full e85

[munchgsx]

I am also considering megasquirt. Is there a general pulg and play harness or is this something that has to be built from scratch. Unfortunatly MS might be above my electronics knowlege. Very intimadating.

[munchgsx]

Originally Posted by blackrosenova400

I run the maft pro/speed density+keydiver chip ot control wot timing. Plus im running full e85

So is this a good direction to go? What are your results?

[Andrew7dg]

Do you like it? More feed back?


On a side note on IAT sensors, it does help to have one if you have water injection on the car.

Water injection gives a little cooling to the intake temperatures. On MAS sensors, the cooling isn't usually picked up because the temperature is taken on the intake tube before the turbo.

If you have the IAT after the water injection, cooler intake temps are achieved and you can run more timing.

I am going to try this and see how this works.

This goes completely off topic... sorry...