Intake for 1g w 2gMAF?

[94talonawd]

I had the same problem. But I found something that works great.

Buy a 180 degree intercooler pipe fomr jcwhitney and cut that in half, twist it 180 degrees, and weld it. For the Maf to intercooler coupler use 4.5-2.5 reducer from home depot, and then use a 2.5 coupler for the turbo to intake.
Drill a hole in the pipe and weld on a 1.5 pipe to it for the BOV. And do some smaller ones for the other little hoses that goes into there.