Quote:
|
Originally Posted by Onefast99gsx
S2Kracka- So basically i would have no lines from the MBC to the BOV line. Everything would done at the turbo, correct? The line going to the wastegate is the one that's got the little copper connector with the little pin hole in it.
|
Correct, you will have no lines running to the BOV line. Its best to keep the MBC hoeses as short as possible, this helps reduce/prevent boost spike (generally the boost responds more quickly). As for the copper connector with the pinhole in it, w/o seeing you exact boost controller I'm assuming that is the outlet nipple on the side (not bottome) of the unit similar to my Joe P. If I assumed correctly, then yes, that is the nipple to connect with the wg.
Threaded Mode