519 AWHP- So far....
Finally got the old girl up to DB last night and got on the rollers. With Shane tickling the keyboard, we got her up to 519 AWHP with it breaking up a bit after about 3900 rpm. We gapped the plugs down a bit more and she was making a clean run until the lower IC coupler blew off again. It's such a tight corner out of the turbo to clear the front motor mount, there's no good way to keep it together at 30+ psi. So after we get an elbow welded on this week and I upgrade the upper pipe to a 3", we'll give her another go. The final couple passes were at about 32psi running straight E98 Ethanol and it was still about 85-90 degrees in the dyno room. The dyno curve is REAL nice, I love this combo for street/strip duty. Dyno sheet below.
http://www.mitsustyle.com/photopost/...=500&ppuser=40
__________________
2009 Corvette Z51-SOLD
1992 Mitsubishi Eclipse GSX-SOLD
2013 BMW Z4-Current summer hooptie
2017 GMC Yukon-Current winter hooptie
Last edited by Goat Blower; 07-26-2007 at 01:38 PM..
|