MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Tuning/Electrical

Reply
 
Thread Tools Display Modes
Old 12-12-2007   #1
thesoccadude
 

Join Date: Jul 2006
Location: little canada
Posts: 189
What size injectors for a 50-trim??

Just wondering what size I should go to get the full potential out of the turbo... would you guys recommend chipping to compensate and then fine tuning with an safc? People have recommended dsmlink but to be honest, I'm not sure what the benefits are. Thanks much guys.
thesoccadude is offline   Reply With Quote
Old 12-12-2007   #2
Super Bleeder!!
Reynolds number user
 
Super Bleeder!!'s Avatar
 

Join Date: Oct 2003
Location: grove/tempe
Posts: 3,553
Send a message via AIM to Super Bleeder!!
Re: What size injectors for a 50-trim??

660s or 720s. Have shane at DB burn you a chip during a dyno session. No afc needed.
__________________
07 Ducati Monster S4R
00 honda elite 50 (64 mph braH!)
05 malaguti F15
04 E55 AMG
Super Bleeder!! is offline   Reply With Quote
Old 12-12-2007   #3
niterydr
back in the saddle again
 
niterydr's Avatar
 
24 Hours Rally Champion! 3D Pacman white house edition Champion! 3D Racing - Track 2 Champion! ATV Winter Challenge Champion! Bloody Pingu Champion! WRX Racing 2 Champion!
Tournaments Won: 5

Join Date: Oct 2003
Location: Elkhart Texas
Drives: 2015 Ram Quad Cab Hemi, 1999 FRC Corvette, 93 Stealth Turbo
Posts: 6,411
Send a message via AIM to niterydr
Re: What size injectors for a 50-trim??

1g, 2g, gvr4?
FMIC?
race or pump gas?
a properly burned chip will balance out to the same afr control versus a dsmlink, but timing control is a bit more involved in a burned chip setup.
__________________
My street car runs low 11's and my race car's personal best is a mid 11....
niterydr is offline   Reply With Quote
Old 12-12-2007   #4
JET
Is funding Exxon.
 
JET's Avatar
 

Join Date: Oct 2003
Location: Ham Lake
Drives: like a bat outta hell!
Posts: 7,983
Send a message via AIM to JET Send a message via Yahoo to JET
Re: What size injectors for a 50-trim??

Yep, 660-720 will be perfect. I ran 660's on my 50 trim and didn't quite get them maxed out.
__________________
Is burning corn and stayin' warm!

My motorcycle is stock and reliable, my Talon is neither!
JET is offline   Reply With Quote
Old 12-12-2007   #5
HiImBrian
 
HiImBrian's Avatar
 

Join Date: Mar 2006
Location: FargO
Drives: the girls crazy
Posts: 3,012
Send a message via AIM to HiImBrian
Re: What size injectors for a 50-trim??

I've been running 680s on my 50 and they work great. They'll actually be for sale pretty soon pending my 1000cc injectors
__________________
pics or gtfo
HiImBrian is offline   Reply With Quote
Old 12-12-2007   #6
thesoccadude
 

Join Date: Jul 2006
Location: little canada
Posts: 189
Re: What size injectors for a 50-trim??

how good is a tune by shane on the dyno? so... 720s will be more than enough? will i need to upgrade my walbro 190?
thesoccadude is offline   Reply With Quote
Old 12-12-2007   #7
HiImBrian
 
HiImBrian's Avatar
 

Join Date: Mar 2006
Location: FargO
Drives: the girls crazy
Posts: 3,012
Send a message via AIM to HiImBrian
Re: What size injectors for a 50-trim??

Shane will tune your car really well. imo db is usually a little more spendy, but it's worth every dollar. That's where I'll have my car tuned in the spring
__________________
pics or gtfo
HiImBrian is offline   Reply With Quote
Old 12-12-2007   #8
JET
Is funding Exxon.
 
JET's Avatar
 

Join Date: Oct 2003
Location: Ham Lake
Drives: like a bat outta hell!
Posts: 7,983
Send a message via AIM to JET Send a message via Yahoo to JET
Re: What size injectors for a 50-trim??

If you truly are maxing out the 50 trim, then the walbro likely won't be enough. What is the rest of your setup like?
__________________
Is burning corn and stayin' warm!

My motorcycle is stock and reliable, my Talon is neither!
JET is offline   Reply With Quote
Old 12-12-2007   #9
twack
It was a auto get over it
 
twack's Avatar
 

Join Date: Apr 2006
Location: rochester mn
Drives: something better then you
Posts: 1,987
Send a message via AIM to twack
Re: What size injectors for a 50-trim??

Dsmlink and 1000ccs are what i run on my 50trim but im running e85
twack is offline   Reply With Quote
Old 12-12-2007   #10
Kracka
R U DTF bro?
 
Kracka's Avatar
 

Join Date: Aug 2003
Location: Oak Point, TX
Drives: C8 Stingray Z51
Posts: 20,620
Re: What size injectors for a 50-trim??

Rewire your Walbro 190 and I'm willing to bet it will be more than enough.
__________________
Quote:
Originally Posted by Murlo26 View Post
I agree with Kracka.
Kracka is offline   Reply With Quote
Old 12-12-2007   #11
thesoccadude
 

Join Date: Jul 2006
Location: little canada
Posts: 189
Re: What size injectors for a 50-trim??

fmic w/piping, 2g ehxuast mani w/40mm wastegate, 2g o2 housing, 2gmas, 190 walbro, 550cc injectors. that's about it right now.
thesoccadude is offline   Reply With Quote
Old 12-12-2007   #12
Shane@DBPerformance
formerly ecoli
 
Shane@DBPerformance's Avatar
 

Join Date: Oct 2003
Location: On the dyno
Posts: 4,892
Send a message via AIM to Shane@DBPerformance
Re: What size injectors for a 50-trim??

The Walbro 190 might work. It will depend on the boost pressure, fuel pressure and HP being made. At a base fuel pressure of 40psi + 30psi of boost a Walbro 190 @ 13.5 volts will flow around 38 gal/hr. 660cc injectors can supply around 42 gal/hr of fuel maxed out, so they max somewhat near each other. A really good 50-trim setup on race gas and high boost would be able to max both 660s and the 190 pump though, but most people won't ever do that.
__________________
www.dbptuning.com
Shane@DBPerformance is offline   Reply With Quote
Old 12-12-2007   #13
thesoccadude
 

Join Date: Jul 2006
Location: little canada
Posts: 189
Re: What size injectors for a 50-trim??

i'm hoping to do pump gas, around 350hp...
thesoccadude is offline   Reply With Quote
Old 12-12-2007   #14
JET
Is funding Exxon.
 
JET's Avatar
 

Join Date: Oct 2003
Location: Ham Lake
Drives: like a bat outta hell!
Posts: 7,983
Send a message via AIM to JET Send a message via Yahoo to JET
Re: What size injectors for a 50-trim??

I think you are hoping a bit high. 3" exhaust? What kind of FMIC? I would guess 310 awhp on pump.
__________________
Is burning corn and stayin' warm!

My motorcycle is stock and reliable, my Talon is neither!
JET is offline   Reply With Quote
Old 12-12-2007   #15
thesoccadude
 

Join Date: Jul 2006
Location: little canada
Posts: 189
Re: What size injectors for a 50-trim??

that's fine. 300would be great. thanks much.
thesoccadude is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:11 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.