Need help finishing car for this weekend

**Shane@DBPerformance** · 10-03-2005

I am trying to get my girlfriend's car running and raceable for this weekend. If anyone has a lot of time Tuesday and Wednesday night to help and knows what they are doing, then let me know.

I am going to try to a working tranny together Tuesday night. Otherwise, it needs a FMIC put on, rear shocks and springs installed, brakes bled, new front axle cv boots, and motor/tranny installed.

cudvig · 10-03-2005

I could most likely help with somethings on thursday. during the day?

-Colin

Nash · 10-04-2005

I think I will have all of Wed night free if you trust me to do anything to help.

**Shane@DBPerformance** · 10-04-2005

Cudvig, I will be working at night.

Nash, come down, I think you have worked on a 1G before.

1QUICK4 · 10-04-2005

I could pitch in on Wed. night if you need

LMK,
-Brian-

**Goat Blower** · 10-04-2005

Quote:

Originally Posted by ecoli

I am going to try to a working tranny together Tuesday night. Otherwise, it needs a FMIC put on, rear shocks and springs installed, brakes bled, new front axle cv boots, and motor/tranny installed.

Is that all?

**Shane@DBPerformance** · 10-04-2005

Getting the tranny together has been the biggest pain. Her's is a 94, which is different than the 90-93 and somewhat different than the 95-99. Cher screwed up her case, which has turned into a major problem, since her rails don't fit right into an earlier case, which we have a few of. And the shifter stuff is slightly different on the 2G cases, which I don't have extras sitting around, even though I did run my 99 tranny in her car at one time, so it can be made to work.

GVR-4579 · 10-04-2005

I have done a few trannies but not that year, what do you mean the case is screwed up?

rk4g63 · 10-04-2005

I can help but I don't know worth shit about putting together a DSM. If u tell me what to do, I can help - good unskilled labor. LOL! I can help with any machining if u have any, though. I'm a decent machinist.

**Shane@DBPerformance** · 10-05-2005

Meet at the shop at around 7pm on Wed, if you guys can help.

The axles are taken care of and the tranny is a few minutes of work away from being done, just need the director of twin cities late night street racing to be give me my VC back.

Super Bleeder!! · 10-05-2005

hahaha make him change his name to that! stat!

EclipseGST · 10-05-2005

Are you racing it this weekend, is that why the rush? If so where do you plan to go?

**Shane@DBPerformance** · 10-05-2005

Just Rock Falls.

1QUICK4 · 10-05-2005

Quote:

Originally Posted by ecoli

Meet at the shop at around 7pm on Wed, if you guys can help.

I'll be there!

LaunchHard · 10-05-2005

I can help you tonight if you want me too. I'll stop by the shop after school.

Did my piping get in yet.

slowbubblecar · 10-05-2005

If the transmission case is the problem, I have a case that would probably work. I got a tranny from mike that was supposed to be a dsm replacement but the numbers are different so I an not sure what it is. It could be a jdm dsm, Expo? or maybe something else, but it looks the same. It looks exactly like my 95 did and has the same spline count.

EclipseGST · 10-05-2005

Quote:

Originally Posted by ecoli

Just Rock Falls.

Which day do you plan on going? I am planning one of the 2 days this weekend for sure but it would be nice to see some familiar faces up there.

Edit: Well I guess I figured that out... Let me know if you need help with anything on friday Shane.

**Shane@DBPerformance** · 10-06-2005

Thanks for help Andy and Brian. Probably saved me 2 nights worth of work.

Nash · 10-06-2005

No problem Shane. If you need any help again tonight let me know and I can come back up there and give you a hand.

1QUICK4 · 10-06-2005

No problem, I needed to bust my knuckles working on a 1G. It's been awhile!

I checked out that radiator and it is indeed F'd up. It has a crack on one of the tubes. Sorry man.