Need help finishing car for this weekend
 

I am trying to get my girlfriend's car running and raceable for this weekend. If anyone has a lot of time Tuesday and Wednesday night to help and knows what they are doing, then let me know.

I am going to try to a working tranny together Tuesday night. Otherwise, it needs a FMIC put on, rear shocks and springs installed, brakes bled, new front axle cv boots, and motor/tranny installed.

Re: Need help finishing car for this weekend
 

I could most likely help with somethings on thursday. during the day?

-Colin

Re: Need help finishing car for this weekend
 

I think I will have all of Wed night free if you trust me to do anything to help.

Re: Need help finishing car for this weekend
 

Cudvig, I will be working at night.

Nash, come down, I think you have worked on a 1G before. :)

Re: Need help finishing car for this weekend
 

I could pitch in on Wed. night if you need

LMK,
-Brian-

Re: Need help finishing car for this weekend
 

Is that all? :D:D

Re: Need help finishing car for this weekend
 

Getting the tranny together has been the biggest pain. Her's is a 94, which is different than the 90-93 and somewhat different than the 95-99. Cher screwed up her case, which has turned into a major problem, since her rails don't fit right into an earlier case, which we have a few of. And the shifter stuff is slightly different on the 2G cases, which I don't have extras sitting around, even though I did run my 99 tranny in her car at one time, so it can be made to work.

Re: Need help finishing car for this weekend
 

I have done a few trannies but not that year, what do you mean the case is screwed up?

Re: Need help finishing car for this weekend
 

I can help but I don't know worth shit about putting together a DSM. If u tell me what to do, I can help - good unskilled labor. LOL! I can help with any machining if u have any, though. I'm a decent machinist.

Re: Need help finishing car for this weekend
 

Meet at the shop at around 7pm on Wed, if you guys can help.

The axles are taken care of and the tranny is a few minutes of work away from being done, just need the director of twin cities late night street racing to be give me my VC back.

Re: Need help finishing car for this weekend
 

hahaha make him change his name to that! stat!

Re: Need help finishing car for this weekend
 

Are you racing it this weekend, is that why the rush? If so where do you plan to go?

Re: Need help finishing car for this weekend
 

Just Rock Falls.

Re: Need help finishing car for this weekend
 

I'll be there!

Re: Need help finishing car for this weekend
 

I can help you tonight if you want me too. I'll stop by the shop after school.

Did my piping get in yet.

Re: Need help finishing car for this weekend
 

If the transmission case is the problem, I have a case that would probably work. I got a tranny from mike that was supposed to be a dsm replacement but the numbers are different so I an not sure what it is. It could be a jdm dsm, Expo? or maybe something else, but it looks the same. It looks exactly like my 95 did and has the same spline count.

Re: Need help finishing car for this weekend
 

Which day do you plan on going? I am planning one of the 2 days this weekend for sure but it would be nice to see some familiar faces up there.

Edit: Well I guess I figured that out... Let me know if you need help with anything on friday Shane.

Re: Need help finishing car for this weekend
 

Thanks for help Andy and Brian. Probably saved me 2 nights worth of work.

Re: Need help finishing car for this weekend
 

No problem Shane. If you need any help again tonight let me know and I can come back up there and give you a hand.

Re: Need help finishing car for this weekend
 

No problem, I needed to bust my knuckles working on a 1G. It's been awhile!

I checked out that radiator and it is indeed F'd up. It has a crack on one of the tubes. Sorry man.